69
Product Information -
the underside with white HLP laminate.
Front and side edging in FENIX NTM 1 mm thick in the
ernestomeda range colours.
4. 5 VENEERED WORKTOPS
DECk 60 MM THICk
VENEERED WORkTOP
Made from layered Albasia Falcata wood 60 mm thick
with finger joints, finished with bleached Canaletto
Walnut veneer.
Varnishing process: solvent-borne stain, acrylic
primer and top coat.
STEP 60 MM THICk
VENEERED WORkTOP WITH WOODEN SUbSTRATE
Made from layered Albasia Falcata wood 60 mm thick
with finger joints, finished with oak, ash, bleached
Canaletto Walnut or American walnut veneer.
Varnishing process: solvent-borne stain, acrylic
primer and top coat.
SNACk - COLOR OAk 80 MM THICk
COLOR OAk VENEERED WORkTOP
Made from 19 mm thick wood particle panels with
emission having minimal formaldehyde content (Class
E1 under UNI/EN 13986/2005 standard). Panels are
water repellent (V100 standard) veneered with wood
veneer thickness mm. 0.6 (oak). The bottom is
enclosed with an 18 mm thick particle board panel
with Optical3D finish on two sides.
Varnishing process: solvent-borne stain, acrylic
primer and top coat.
4. 6 CORIAN® WORKTOPS
I TOP 12 MM THICk - UNION 12 MM THICk
CORIAN® WORkTOP WITH STRAIGHT EDGE
Made from a worktop slab 12 mm. thick (in the
ernestomeda range colours).
The front and side edges have a sanded finish.
The Union version of the worktop has an integral
upstand 24 mm thick; the total height of the worktop
plus upstand is 80 mm.
GRADE 20 MM THICk
CORIAN® WORkTOP WITH SHAPED EDGE
Made by gluing a slab of 12 mm thick Corian®, in
the ernestomeda range colours, onto a multilayered
poplar wood substrate 8 mm thick
The worktop has “shaped” front and side edgings in
12 mm thick Corian®, with sanded finish.
The Union version of the worktop has an integral
upstand 24 mm thick; the total height of the worktop
plus upstand is 80 mm.
