Documentation
For further details, consult the technical sheet
STEKDH4TP_EN.pdf, available for download from www.ekinex.com
Versions
Code
EK-DH4-TP
Documentation
For further details, consult the technical sheet
STEKDG2TP_EN.pdf, available for download from www.ekinex.com
Versions
Code
EK-DG2-TP
EK-DH4-TP
EK-DG2-TP
EK-QR6-IR
EK-QR6-IR
Description
The Ekinex® presence sensor EK-DG2-TP is a ceiling flush mount Passive Infrared
(PIR) motion detector, for the detection of movement and presence of people in
indoor spaces with a coverage area of 360°. The detection area can be extended
using other sensors configured as slave devices. An integrated light sensor, combined
with the motion detector, can manage light switching depending on brightness level
as well as presence. The device has two distinct output channels for lighting, with
independent parameters; the operation can be automatic or semi automatic. The
device is also capable of maintaining a constant brightness level in the room by
controlling a dimmable light source. All of the above parameters can be set by the
user either through ETS or by means of a dedicated IR remote during installation.
The device has two additional HVAC channels, which act in a similar way as the
Light Control channels but without the standby time and light level dependence. An
additional alarm channel can switch the load on or off depending on the number of
trigger events (movements) detected in a time frame of configurable duration.
Main features
• Semi-automatic or fully automatic operation
• Two independent Light control channels
• Two independent HVAC control channels
• One alarm channel
• An additional device can be used as slave for any of the channels
• Detection span of 360°, sectors can be masked through optical shields
• Adjustable Sensitivity, with “Walk test” to verify detection range
• Parameters can be set from ETS or through an IR remote
Technical data
• Rated voltage: 24 Vdc (21 - 30 Vdc) supplied by KNX bus
• Current consumption (on KNX bus): max 10 mA (operation) / 5 mA (Standby)
• Detection range: 360° circular (maskable), up to 12 m diameter at 2.5 m
mounting height
• Light measurement range: 10..2000 Lux
• Housing, lens and frame in plastic material
• Safety standards: IEC 61000-6-1 / IEC 61000-6-3 / EN55014 / EN 50491
Environmental conditions
• Operating temperature: - 20 ... + 40°C
• Relative humidity: 95% not condensing
• Environmental protection: IP20
Switching, display and detection elements
The device is equipped with:
• on the rear side, a programming pushbutton
• visible through the plastic lens, a blue programming LED, a red signalling LED,
a PIR sensor, a brightness sensor and an IR receiver
Accessories
The following accessories are available to be ordered separately:
• IR Remote Controller - EK-QR6-IR and support for protruding mounting - EK-QS3
Ceiling mounted
presence sensor
WALL-MOUNT DEVICES
Description
The Ekinex® EK-DH4-TP presence sensor is an infrared motion detector passive (PIR)
for outdoor ceiling or wall mounting, for motion and presence detection of people in
outdoor spaces with a 360° coverage area. The detection area can be extended using
other sensors configured as slave devices. One integrated light sensor, combined
with the motion detector, can manage the ignition of light according to brightness
level and presence. The device has two channels of separate output for lighting, with
independent parameters; the operation can be automatic or semi-automatic. All the
above listed parameters can be set by the user via ETS or via a dedicated IR remote
control during installation. The device has two additional HVAC channels, which act
similarly to brightness control channels, but without the standby time function and
light level dependency. One additional alarm channel can activate or deactivate
the load depending on the number of trigger events (movements) detected in a
configurable time interval.
Main features
• Semi-automatic or fully automatic operation
• Two independent light control channels
• Two independent HVAC control channels
• An alarm channel
• An additional device can be used as a slave for any of the channels
• Detection range of 360° (180° on the wall), sectors can be masked
through optic screens
• Adjustable sensitivity, with "Walk test" to verify the detection radius
• Parameters can be set by ETS or via an IR remote control.
Technical data
• Rated voltage: 24 VDC (21-30 VDC) supplied by KNX bus
• Current consumption (on KNX bus): max. 10 mA (operation) / 5 mA (standby)
• Sensing range: 360° circular (masking), up to 32 m diameter at 2.5 m
mounting height
• Light measuring range: 10..2000 Lux
• Housing, lens and frame in plastic material
• Safety standards: IEC 61000-6-1 / IEC 61000-6-3 / EN 55014 / EN 50491
• Environmental conditions
• Operating temperature: - 20 ... + 40°C
• Relative humidity: 95% not condensing
• Environmental protection: IP20
Switching, display and detection elements
The device is equipped with:
• on the rear side, a programming pushbutton
• visible through the plastic lens, a blue programming LED, a red signalling LED,
a PIR sensor, a brightness sensor and an IR receiver
Accessories
The following accessories are available to be ordered separately:
• IR Remote Controller - EK-QR6-IR
Presence sensor
for outdoor mounting
WALL-MOUNT DEVICES
SMART LIGHTING
SMART LIGHTING
54
55
