Movement sensor
SENSORI
EK-CLM-GAA
Documentation
For further details, consult the technical sheet
STEKSM2TP_EN.pdf, available for download from www.ekinex.com
Versions
Code
EK-SM2-TP
Documentation
For further details, consult the technical sheet
STEKDF2TP_EN.pdf, available for download da www.ekinex.com
Versions
Code
EK-DF2-TP
EK-DF2-TP
EK-QR6-IR
Description
The Ekinex® EK-SM2-TP movement sensor detects movement and presence of people
in a semi-circular area. It is ideally used in corridors, transit areas, toilets, staircases,
elevators and, in general, all areas having occasional transit. The device has one
channel for lighting, and one channel for the control of HVAC devices. Movement
and presence detection are operated by three PIR sensors (passive infra-red); one
further sensor measures room luminosity. The device can work in semi-automatic or
automatic mode. The device integrates a KNX bus communication module, is suitable
for flush-mounting boxes and is powered by a SELV voltage by means of the KNX bus.
Main features
• 180° detection range (semi-circular)
• Max distance 10 m (mounted at 3 m height)
• Mounting height from 1 to 3 m
• 3 passive infra-red (PIR) sensors
• Adjustable sensitivity (10 levels)
• Master or slave configuration
• Connection to bus line with KNX terminal block
• Frontal programming pushbutton and LED
• Wall-mounting installation on round or square wall box
• Metal support with screws for mounting on round or square mounting box
(holes 60 mm apart)
• IP20 protection degree (installed)
• Weight 40 g
Technical data
• SELV voltage from KNX bus
• Power absorption 0,4 W
Products included
Delivery includes a terminal block for connection to the bus, a metal support for
installation onto round or square mounting box (fixing holes 60 mm apart) and two
fixing screws.
Accessories
The following accessories are available to be ordered separately:
• square frame in Form (page 131) or Flank (page 132) series
• square plate with window 60 x 60 mm - EK-PQS ('NF page 134)
EK-DQS (Deep page 137) / EK-SQS (Surface page 141)
• lens with modular cover 60 x 60 mm (see table below)
Component
[Pcs.]
Dimensions [mm]
Colour
Code
Lens with cover
for sensor
EK-SM2-TP
1
60 x 60
(lens protrusion 21)
Ice white
EK-CLM-GAA
Other colours
on request
EK-CLM-GA_
Description
The Ekinex® presence sensor EK-DF2-TP is a ceiling flush mount Passive Infrared
(PIR) motion detector, for the detection of movement and presence of people in
indoor spaces with a coverage area of 360°. The detection area can be extended
using other sensors configured as slave devices. An integrated light sensor, combined
with the motion detector, can manage light switching depending on brightness level
as well as presence. The device has two distinct output channels for lighting, with
independent parameters; the operation can be automatic or semi automatic. The
device is also capable of maintaining a constant brightness level in the room by
controlling a dimmable light source. All of the above parameters can be set by the
user either through ETS or by means of a dedicated IR remote during installation.
The device has two additional HVAC channels, which act in a similar way as the
Light Control channels but without the standby time and light level dependence. An
additional alarm channel can switch the load on or off depending on the number of
trigger events (movements) detected in a time frame of configurable duration
Main features
• Semi-automatic or fully automatic operation
• Two independent Light control channels
• Two independent HVAC control channels
• One alarm channel
• An additional device can be used as slave for any of the channels
• Detection span of 360°, sectors can be masked through optical shields
• Adjustable Sensitivity, with “Walk test” to verify detection range
• Parameters can be set from ETS or through an IR remote
Technical data
• Rated voltage: 24 Vdc (21 - 30 Vdc) supplied by KNX bus
• Current consumption (on KNX bus): max 10 mA (operation) / 5 mA (Standby)
• Detection range: 360° circular (maskable), up to 9 m diameter at 2.5 m
mounting height
• Light measurement range: 10..2000 Lux
• Housing, lens and frame in plastic material
• Safety standards: IEC 61000-6-1 / IEC 61000-6-3 / EN55014 / EN 50491
Environmental conditions
• Operating temperature: - 20 ... + 40°C
• Relative humidity: 95% not condensing
• Environmental protection: IP20
Switching, display and detection elements
The device is equipped with:
• on the rear side, a programming pushbutton
• visible through the plastic lens, a blue programming LED, a red signalling LED,
a PIR sensor, a brightness sensor and an IR receiver
Accessories
The following accessories are available to be ordered separately:
• IR Remote Controller - EK-QR6-IR and support for protruding mounting - EK-QS3
Ceiling mounted
presence sensor
WALL-MOUNT DEVICES
SMART LIGHTING
SMART LIGHTING
52
53
