• Recessed round luminaire for outdoor installation in the ground.
• Configuration: die-cast aluminium structure. EN AB-47100 alloy (low
copper content). AISI 316L stainless steel frame.
• Double layer coating for high resistance to corrosion: The low copper
Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Tempered transparent or sandblasted glass (no-slip glass VA on request) and moulded silicone gasket.
• Protection Rating: IP67
• In compliance with EN 60598-1
• Class of insulation: I
• Installation: the luminaire is equipped with one M20 plastic cable gland
(6<ø12mm) and a piece of cable for an easy-to-make connection. Outdoor use requires suitable flexile cables assuring the watertightness of the cable gland. Installation requires a dedicated box to be ordered separately. It is important to provide a >400mm gravel layer or a drain system (for concrete surfaces) to ensure good drainage and to avoid water stagnation.
• We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
• The luminaire is supplied with a 2-way terminal block for 3-conductor cables - IP68 H2O STOP
Colors
0. Inox
Италия
