41
ROBO ELECTROMAGNETIC-RELEASE LOCK
Robo is a built-in lock, expressly designed and developed for armored aluminum and steel profiles. Unlike other safety locks
available on the market, it has a unique Cemit-patented locking device consisting of two sliding blocks locking together and kept
in place by a central stop-pin. The pin can be adjusted to three sizes.
The use of sliding blocks and a fixed pin removes the gap between the door wing and the frame. Unlike ordinary pin-locks or
bayonet-locks, a special release mechanism causes the lock to open even when strong pressure is put on the door.
NC version
Robo NC locks a door even without power supply and can be combined with any automatic door-opening mechanisms.
For private security firms, the lock efficiency exceeds the level required by UNI EN 50518 for certification of security firms and alarm
monitoring and reception centers. Robo NC meets the EN 14846 standard for electromechanical locks in the entrance areas of
alarm monitoring and reception centers (ARCs).
Robo NC can also be supplied with an aluminum container (and a stainless steel protection plate).
40
LIGHTING
Lighting is exclusively made by high-efficiency LEDs with sufficient heat dissipation and aluminum sections suitably cut and
assembled as required for their perfect integration into the design of interiors.
LEDs are powered by highly reliable power supply units, whose capacity is decided by our technicians during the lighting design
phase. Through the biometric reader, LEDs will automatically light when a door opens and turn off when the user leaves the strong
room and sets the alarm on – all with the touch of a fingertip.
CARATTERISTICHE LED
Colour: Warm white (4000K)
Led: 5050SMD Super Bright
# of led: 60 LEDs/m
Power: 14.4 W/m
Voltage: 12Vdc
CARATTERISTICHE ALIMENTATORI
320W Single Output Switching Power Supply
AC INPUT: 90 ~ 305VAC / 47 ~ 63Hz
Built-in active PFC
High efficiency up to 95%
Protections: Short Circuit / Over Current / Over Voltage / Over Temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 design
Type HL LED Driver for use in Class I, Division 2 hazardous location luminaires
Suitable for dry / damp / wet location
