C G 492 111F
Stainless steel
Width 100.2 cm
Liquid gas 28 – 37 mbar
Wok burner with up to 5.8 kW
C G 492 211
Stainless steel
Width 100.2 cm
Natural gas 20 mbar
Wok burner with up to 6 kW
Included in the price
1 wok attachment ring
Necessary installation accessories
C A 429 410
Frame set including decorative frame
(to be welded in) and holding frame
Special accessories
W P 400 001
Wok pan made of multiple-layer
material
With round bottom and handle,
ø 36 cm, 6 litres, height 10 cm.
Combinable with:
Ceiling ventilation 400 and 200 series
Table ventilation 400 series
Island- and wall-mounted hood 400 series
Flat kitchen hood 200 series
Canopy 200 series
Good to know:
the hood has to be larger than the
cooktop(s) or it has to be as large as
the cooktop(s). Please check the
requirements in chapter ventilation.
Gas cooktop 400 series
C G 492
–
Five multi-ring burners, up to 18 kW
–
Full electronic power level
regulation on 12 levels
–
Precise and reproducible flame size
–
Automatic fast ignition, electronic
flame monitoring with automatic
re-ignition
–
Simmer function for cooking on a
very low output level
–
Solid smooth-surface cast iron pan
supports on the same level as the
worktop
–
Solid stainless steel control knob
Cooking zones
CG 492 111F
1 multi-ring wok burner
(300 W – 5800 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(165 W – 4000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(165 W – 2000 W), suitable for pots up
to max. ø 24 cm.
CG 492 211
1 multi-ring wok burner
(300 W – 6000 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(165 W – 4000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(165 W – 2000 W), suitable for pots up
to max. ø 24 cm.
Handling
Control knobs with illuminated ring,
cooking zone and output level markings.
One-handed operation.
Full electronic control in 12 output
levels for exact power level regulation
plus simmer function.
Automatic fast ignition.
Features
Simmer function.
Three-part cast iron pan support with
flat, continuous pot surface, on the
same level as the worktop.
Brass burner rings.
Safety
Electronic flame monitoring with
automatic re-ignition.
Residual heat indication.
Safety shut-off.
Planning notes
The frame set (necessary installation
accessory) can be sent in advance to
the manufacturer of the stainless steel
or granite worktop for fitting.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection
(the appliance is not operable without
power supply).
The horizontal positioning of the knobs
may be aligned with the specific burners.
The drawing "Installation of the control
knob" must be observed if the panel is
more than 23 mm thick (there must be
a recess at the rear).
Minimum worktop depth 70 cm.
Air intake from above.
No intermediate shelf required.
Due to the separate frame welded into
the worktop, all parts remain fully
accessible.
Rear panel and wall trims must be
heat-resistant and consist of a
non-flammable material.
The appliance can be fixed from above.
A minimum lateral clearance of at least
300 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
With a total connected load of more
than 11 kW local regulations
concerning room ventilation, room size
and combination of extraction or
recirculation hoods must be observed.
Minimum clearance between gas
cooktop(s) with more than 11 kW and
ventilation hood 70 cm.
The combination with VL 414 is not
recommended, since the air extraction
from the centre burner cannot be
guaranteed due to the distance.
Appliance weight: approx. 35 kg.
Connection
Total connected load gas
17.8/18.0 kW.
Total connected load electric
15.0/15.0 W.
Connecting cable 1.4 m with plug.
