249
ACCESSORIES
BRANCH BOXES
· Underwater distribution box made of V4A stainless steel for use in special areas like swimming pools, fountains, damp rooms and containers. The branch box
can be used to a maximum depth of 3m and is available in different versions. The numbered models shown are examples for information only. Please make sure
that you specify the designated cable diameters on the input and output side with your order so that we can supply you with the correct seal inserts. (IP68-rated
protection is only available in conjunction with special underwater cables or silicon cables. In addition, the box needs to be filled with epoxy resin or silicon –
please request the filling compound separately.)
· This branch box is mounted flush to the ground and comes in cast aluminium for installation on the edge of the pool. After installation the box could be filled with
silicon or epoxy resin. Only suitable for use with underwater spotlights.
· This branch box is mounted flush to the ground and comes in red brass for installation on the edge of the pool. After installation the box could be filled with silicon
or epoxy resin. Only suitable for use with underwater spotlights.
· This branch box is mounted flush to the ground and comes in stainless steel for installation on the edge of the pool. After installation the box is filled with silicon
or epoxy resin. Only suitable for use with underwater spotlights.
· Underwater distribution box, IP68, V2A stainless steel. The branch box can be used to a maximum water depth of 1m and has 6 connections for round cables
ranging from 6 to 8mm in diameter. (IP68-rated protection is only available in conjunction with special underwater cables or silicon cables. In addition, the box
needs to be filled with epoxy resin or silicon – please request the filling compound separately.)
BRANCH BOXES 4.0268
BRANCH BOXES ALUMINIUM 4.0069
BRANCH BOXES RED BRONZE 4.0069
BRANCH BOXES STAINLESS STEEL 4.0069
4.0268.10.13
stainless steel
1 input PG21, PVDF, ø-Cable 14–18 mm
3 outputs PG16, PVDF, ø-Kabel 9–13,5 mm
IP68/IP67
ø 226 x 95 mm
4.0268.10.15
stainless steel
1 input PG21, PVDF, ø-Cable 14–18 mm
5 outputs PG16, PVDF, ø-Kabel 9–13,5 mm
IP68/IP67
ø 226 x 95 mm
4.0268.10.17
stainless steel
1 input PG21, PVDF, ø-Cable 14–18 mm
7 outputs PG16, PVDF, ø-Kabel 9–13,5 mm
IP68/IP67
ø 226 x 95 mm
4.0690.00.00
stainless steel
1 input PG16, PVDF, ø-Cable 9–13,5 mm
6 outputs PG11, PVDF, ø-Cable 7–10,5 mm
IP68/IP67
118 x 118 x 82 mm
4.0069.00.00
aluminium
1 input Cable duct support ø 21 mm
2 outputs Pressure gland ø 7–10 mm
IP67
140 x 140 x 88 mm
4.0069.01.00
bronze
1 input Cable duct support ø 22 mm
2 outputs PG16, brass, ø-Cable 9–13,5 mm
IP67
115 x 115 x 68 mm
4.0069.02.00
stainless steel
1 input Cable duct support ø 22 mm
4 outputs (2 x PG 13,5, brass, ø-Cable 14–18 mm
2 x PG 21, brass, ø-Cable 7–9,5 mm)
IP67
140 x 140 x 88 mm
