Material Features
POLYPROPYLENE
- Material: Polypropylene resin with glass fiber , UV stabilizer.
- Process: injection moulding.
- Shock resistant.
- Light weight.
- 100% recyclable.
POLYETHYLENE
- Material: LLDPE Resin. Linear low-density polethylene. UL94 HB.
- Process: Rotational Moulding.
- Resistant to UVI. Fattore UV8, equivalent to 8.000 hours of Florida sunlight.
- Resistant to extreme temperatures (-60ºC to + 80ºC) / ( -76ºF to 176ºF)
- Shock Resistant.
- Light weight
- The planters are easily drilLED to make draining holes.
- Recyclable 100%.
POLYCARBONATE
- Material: Polycarbonate resin. Low viscosity, high strength.
- Process: Injection Moulding.
- Shock Resistant.
- Light weight
- Recyclable 100%.
ALUMINIUM (TABLE BASE)
- Material: AISI12 (EN AC-44100).
- Process: Cast aluminum.
- Shock Resistant.
- Recyclable 100%.
- Powder coated cast aluminum.
ALUMINUM (PROFILE)
- Material: 6060 (AlMgSi,3.3206,A96060).
- Process: Aluminum extrusion.
- Shock Resistant.
- Recyclable 100%.
- Lacquered.
IROKO WOOD (SLOO COLLECTION)
- Hard and very resistant wood.
- Process: Turning.
- Shock resistant.
- Recyclable 100%.
STAINLESS STEEL (COUNTER TOP)
- Material: AISI12 (EN AC-44100).
- Process: Laser cut.
- Shock Resistant.
- Recyclable 100%.
PADDED FOAM
Polyurethane foam is suitable for outdoor use and in areas with high humidity.
Perfectly waterproof, high drying capacity, comfortable and easily cleaned.
Properties
Unit
Value
Specifications
Composition
-
100% Polyester
-
Fibre type
-
Solid, semi-dull
-
Fineness of the fibres
den
10.0
±1.0
Average fibres length
mm
60.0
±2.0
Maximum temperature
ºC
110.0
±1.0
Manufacturing process
Dry carded and termal drying
Recyclability
100%, without additives or binding agents
Other caractherics:
•It does not absorb or retain moisture.
•It is not affected by mould, insects or rodents.
•It does not cause irritation to the skin or the mucous membranes.
Fabrics Features
NAUTICAL Soft leather like fabric suitable for indoor and outdoor use. Standard option for upholstery.
Composition
Vinyl / 100%Polyester HiLoft
Weight
780 gr/m2
Abrasion
>120.000 cycles
Fire Retardancy
EN 1021 (Parts 1 - 2) - M2 (NF P 92.507)
BS 5852 - DIN 53438/T2
Cold Crack
-20ºC
UV Resistance
1000 hours / Factor 7UV
Antibacterial Treatment
Yes
Outdoor Using
Yes
SILVERTEX Vinyl fabric suitable for indoor and outdoor. Special option for upholstery.
Composition
Vinyl / 100%Polyester HiLoft
Weight
685 gr/m2
Abrasion
>300.000 cycles (Martindale)
Fire Retardancy
EN 1021 (Parts 1 - 2) DIN 4102 B2 - NF P 92-503 / M2 UNE 23.727-90
IR/ M2 - IMO A.652 (16) annex 1, 8.2&8.3
Cold Crack
-23ºC
UV Resistance
1000 hours / Factor 7UV
Antibacterial Treatment
Yes
Outdoor Using
Yes
BATYLINE Woven polyester fibre protected with PVC coating. Suitable for indoor and outdoor use.
Composition
Polyester / PVC Composite
Weight
500 gr/m2
Abrasion
SC (very heavy use)
Fire Retardancy
EN 1021 (Parts 1 - 2) - DIN 4102 B1 - NFP 92-503/M2
B-S2-D0 - NF-EN 13501-1 - OMI A.652 (part 16) CAL TB Nº 117
-2000 Section E, Part 1
Extreme working temperatures
-30ºC / +70ºC
UV Resistance
∆E lab < 3 UVA 340 / 2000 hours
Antibacterial Treatment
Yes
Outdoor Using
Yes
CREVIN Upholstery fabric, that as and natural appearance and can be easy cleaned by washing
machines, allowing an easy removal of mildew. Suitable for indoor and outdoor use.
Composition
57%PP 38%PES 5%PU
Weight
546 gr/m2
Abrasion
EN ISO 12947-2:1998, EN 14465:2003/A1:2006 60.000
Assessment of Ignitability
EN 1021-1:2006
UV Resistance
∆E lab > 6 EN ISO 105-B04:1997 (1000 hours)
Antibacterial Treatment
Yes
Outdoor Using
Yes
DICKSON® SUNVISION PVC and acrylic outdoor fabric for Vela Canopy, Vela Round Canopy and
Ulm parasol.
Composition
High tenacity polyester PVC coated and solution dyed
acrylic.
Finish
Cleangard special dirt-resistant and awning water
repellent treatment.
EN | TECHNICAL INFORMATION
POLYURETHANE FOAM (UPHOLSTERED FURNITURE) NEW
Furniture made produced with Polyurethane foam injected. The foam has high resilience and durability.
The flexible Polyurethane foam is covered with a elastic cellular net that keeps the original poduct’s shape
after its use. Prevents fungal and bacterial growth.
Mechanical properties.
- Tensile strength resistance: between 3 & 10 (Kp./cm2)
- Compression resistance: between 1,5 & 9 (Kp./cm2)
- Shear strength resistance: between 1 & 5 (Kp./cm2)
- Modulus of elasticity: between 40 & 200 (Kp./cm2)
Table Tops Features
HPL
Suitable for indoor and outdoor use.
HPL Tabletops for Mari-sol, Faz and Delta table bases thickness is 10mm ± 0,55.
Thickness
ISO 4586 ½
mm
13 ± 0,55
Density
ISO 1183
Kg/m3
1400 - 1500
Absorción de agua
ISO 4586 ½
%
Weight
2,0 max.
Thickness
2,0 max.
Estabilidad dimensional
a altas temperaturas
ISO 4586 ½
%
Long.
0,25 max.
Trans.
0,55 max.
Hardness
ASTM D 785
HR E
97 ca
Resistencia a la flexión
ISO 178
MPa
MPa
Long.
145 min
Trans
135 min
GLASS
Security tempered glass. Thickness: 10 mm.
Technical Features
Units
Value
Resistant to soft body impact
2(B)2
Resistance against suddne temperature changes
K
40
Resistant to wind, snow and large weight
mm
10
Sound insulation
dB
34 (-1,-3)
Thermal Properties
Thermal Transmittance (value U)
W/(m2,K)
5.6
Light Transmission tV
0.53
Light Refletion pV
0.06/0.06
Solar Transmission tE
0.52
Solar Reflection pE
0.06/0.06
Weight
275 gr/m2
Colour fastness weather conditions 1000h
4-5/5 (Norme: ISO 105 B04)
Colour fastness UV
7-8/8 (Norme: ISO 105 B02)
Tear strength
Warp 6,5 daN / Weft 5 daN
Tensile strength
Warp 80 daN / Weft 80 daN
Outdoor Using
Yes
SUNBRELLA® VELUM Outdoor fabrics are waterproof 100 % acrylic. Used for curtains of Canopys
and round Daybed.
Composition
100% Sunbrella Acrylic
Finish
Water-Repellent & Stain Proff
Weight
165 gr/m2
Colour fastness weather conditions 1000h
4-5/5 (Norme: ISO 105 B04)
Colour fastness UV
7-8/8 (Norme: ISO 105 B02)
Colour fastness 40ºC washing
5/5 (Norme: ISO 105 C01)
Care Instructions
Washable 30ºC
Environment
Confidence in textiles CQ 638/2 - Greenguard
Outdoor Using
Yes
SUNBRELLA® SAVANE Outdoor fabrics are waterproof 100% acrylic.
Composition
100% Sunbrella Acrylic
Finish
PFOS (perfluoroctanyl sulphonate)
Weight
400 gr/m2
Colour fastness UV
8/8 (Norme: ISO 105 B02)
Colour fastness UV - Outdoor
4-5/5 (Norme: ISO 105 B04)
Colour fastness 40ºC washing
5/5 (Norme: ISO 105 C06)
Care Instructions
Lavable 40ºC
Environment
Confidence in textiles CQ 638/7 - Greenguard
Outdoor Using
Yes
SUNBRELLA® HERITAGE Outdoor fabrics are waterproof
Composition
50% Sunbrella Recycled acrylic, 47% Sunbrella acrylic, 3% PE
Finish
Water-Repellent & Stain Proff
Weight
335 gr/m2
Colour fatness UV
7-8/5
Colour fastness 40ºC washing
5/5 (Norma: ISO 105 C01)
Care Instructions
Washable 40ºC
Outdoor Using
Yes
GLAD NEW Soft and cozy fabric suitable for indoor and outdoor use.
Composition
100% PP (Ten Stars Yarn)
Weight
975 gr/m2
Abrasion
30.000 cycles
Fire Retardancy
cigarette test: BS5852 part 1:(1990)
Pilling
5
UV Resistance
Factor 7UV BS EN ISO 105-B02:1999
Antibacterial Treatment
Yes
Outdoor Use
Yes
Resistant to sea water
5
DRALON NEW 100% acrilic fiberthat offers us the same properties as a asynthetic fabric and is very
soft to the touch
Composition
100% Arcylic fiber Dralon®
Weight
185-190 gr/m2
Abrasion
25.000 cycles DIN EN ISO 12947 - 2 (Martindale)
Fire Retardancy
BS5852 0/1 - UNE 1021 1 - BS7176 Low Hazard
Pilling
4/5
UV Resistance
UV40 Standard 801
Satin proof finishing
3-5 washings
Outdoor Use
Yes
Resistant to sea water
5
DEKTON ® NEW
Ceramic surface with high resistance, suitable for indoor and outdoor use.
Kelya
Entzo
Danae
Flexural tensile strength
or modulus of rupture
UNE
EN ISO
10545-4
Average flexural
resistance
N/
mm2
46
45
55
Average break load
N
2548
2313
2356
Average break strength
N
14966
13559
13818
Water absorption,
apparent porosity,
density
UNE
EN ISO
10545-3
Water absroption by
boiling
%
0
0,1
0,1
Water absortion by
vacuum
%
0,1
0,1
0,1
Open porosity
%
0,2
0,2
0,2
Aparent relative density
g/cm3
2,51
2,61
2,53
Aparent density
g/cm3
2,50
2,61
2,52
Resistance to deep
abrasion
UNE
EN ISO
10545-6
Wear volume
mm3
125
106
115
Impact resistance
UNE
EN ISO
10545-5
Coefficient of
restitution (COR)
-
0,85
0,85
0,85
Determination of linear
thermal expansion
UNE
EN ISO
10545-8
Expansion 30-100ºC
ºC-1
6,5 · 10-6
5,1 · 10-6
6,3 ·
10-6
Thermal shock
resistance
UNE
EN ISO
10545-9
Damage
-
ULA (no
damage)
ULA (no
damage)
ULA (no
damage)
Moisture expansion
UNE
EN ISO
10545-10
Expansion max
mm/m
0,1
0,1
0,1
Expansion mid
mm/m
0,0
0,0
0,0
Frost resistance
UNE
EN ISO
10545-12
Damage
-
ULA (no
damage)
ULA (no
damage)
ULA (no
damage)
211
210
"PLANTERS" en la
página
