953 / 1953 / 2953
22
29
29
22
269
CONTINUOUS ROD MINIMAL Surface
Wall
Ceiling
MID-POWER LEDs 3000K / 4000K CRI80
750lm/3000K 720lm/4000K / 1m
Rated luminaire luminous flux 725lm/3000K / 1m
Rated luminaire luminous flux 659lm/4000K / 1m
Rated input power 11,5W / 1m 24V DC
Require constant voltage remote power supply
(page 468-469)
Surface mounted
The light source may be cut every 5cm to
achieve the desired length (please refer to
the installation instructions).
Single luminaire
More lined up luminaires
More luminaires with angles
on the same surface
More luminaires with angles
on perpendicular surfaces
The standard luminaires listed in the
catalogue can create surface lighting
lines of 1m, 2m or 3m.
Standard luminaires may be lined
up continuously using the straight
connector delivered with the article.
All surface mounted versions may be
connected to create luminous angles at
90° in relation to a single installation
plan (wall or ceiling) with the specific
accessories.
Luminous angles at 90° on two
perpendicular surfaces (ceiling/wall
or wall/wall) can be achieved as well.
Also in this case specific accessories
are needed.
Staight connector
INCLUDED
S.2305
90° corner coupler accessory
for single flat surfaces
NOT INCLUDED
S.2306
90° corner coupler accessory
for perpendicular surfaces
NOT INCLUDED
S.2301W
3000K
S.2301N
4000K
S.2302W
S.2302N
S.2303W
S.2303N
1,0m
2,0m
3,0m
