57
TECHNICAL INFORMATION
LIGHT VALUES
For luminaires with integrated LEDs, all lumen information com-
prises actual measured values at the operating temperature of the
luminaire. Nominal values from the LED manufacturer are up to
20% higher.
SURFACES, COLOURS AND MATERIALS
All information regarding surfaces are merely colour information
and do not specify material designations. Matt metal surfaces are
either varnished, anodised or galvanised. Bright metal surfaces are
either polished or galvanised.
PROTECTION CLASS
Unless otherwise specified, luminaires are always technically desi-
gned according to protection class IP 20. All transformers and po-
wer supply units have safety extra-low voltage (SELV).
MAßEINHEITEN UND ABKÜRZUNGEN
CRI
=
Colour rendering index
DC
=
Direct current
Hz
=
Hertz
K
=
Kelvin
lm
=
Lumen
RAL
=
Standardised colour value
V
=
Volt
VA
=
Volt-ampere
W
=
Watt
ADDITIONAL INFORMATION
National and international property rights such as patents, regi-
stered designs, industrial designs or trademarks are registered for
many OLIGO lighting systems and luminaires.
All information in this catalogue – particularly the illustrations –
may only be reproduced with prior written authorisation.
Subject to technical modifications. No liability shall be accepted
for the accuracy of technical information or for colour differences.
SYMBOLS
Luminaire is equipped with a lighting con-
trol module ex works.
The luminaire can be switched on or off
using a hand movement near the sensor. If
the hand lingers over the sensor for a lon-
ger time, the dimmer function is activated.
With this intuitive form of light control, the
brightness of the luminaire is controlled
simply by touching the sensor surface. Swit-
ching on and off is done with a brief touch,
continuous dimming is done by leaving
your hand on the sensor surface for longer.
A short press of the button turns the lumi-
naires on and off. If you hold the dimmer
button pressed for a longer time, the lumi-
naires dim continuously up and down.
Switching on and off is done with a brief
pull, dimming is done by pulling the switch
for longer.
You can download a compatibility list of
dimmers at www.oligo.de
A brief push on the button activates diffe-
rent light scenes.
A long push on the button activates the
sleep-tight mode: The luminaire dims down
after two minutes and then shuts off.
The suspension height of the luminaire
can be adjusted variably simply by moving
the lamp head or the cable. The mechani-
cal system for height adjustment is integra-
ted into the canopy, which means it cannot
be seen.
Luminaire with integrated LED technology.
The LED lamps in these luminaires can only
be changed by the manufacturer.
STEUERUNG
GESTEN-
EINSTELLBAR
UP / DOWN
FOKUSSIERBAR
DIFFUSORSTAB
FUNKTION
MEMORY
FUNKTION
SLEEP-TIGHT
2
MODUS
NACHTLICHT
FAMILIE
PRODUKT-
20-60°
8x
8x
LICHT
UP / DOWN
EINSTELLBAR
UP / DOWN
LICHT
UP / DOWN
DIMMER
BERÜHRUNGS-
DIMMTASTER
STEUERUNG
GESTEN-
FAMILIE
PRODUKT-
DIMMER
BERÜHRUNGS-
DIMMTASTER
SELECTABLE
LIGHT SCENES
SLEEP-TIGHT
FUNCTION
PULL-SWITCH
DIMMER
TOUCH
DIMMER
GESTURE
CONTROL
HIDDEN HEIGHT
ADJUSTMENT
DIMMER
SWITCH
SMART CONTROL
INTEGRATED
APPENDIX
EXTERNALLY
DIMMABLE
INTEGRATED
