325
All dimensions are given in mm. A distance of 2 mm must be maintained between the
individual elements: The elements overlap the worktop by 10 mm all the way round.
Calculating cut-out dimension B = total width of the elements plus 2 mm distance
between the elements, minus 10 mm on the right and 10 mm on the left
When installing several SmartLine elements, an additional spacer bar must be fitted in between the individual
elements. The clips supplied with the spacer bars are only required for installing a
CSDA 700x FL. Installing 3 elements and 2 spacer bars:
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 325
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 325
16.03.23 14:00
16.03.23 14:00
