302
Planning notes for KMDA 7272 and KMDA 7473
Models KMDA 7272 and KMDA 7473 feature Miele's Silence motor. This version has a round exhaust duct and is not rotatable.
Alongside the usual extraction and ducted recirculation installation options, Plug&Play installation can also be used. A suitable model
for the installation situation at hand must be chosen (e.g. for KMDA 7272):
Checklist for KMDA 7272 and KMDA 7473 planning:
• Minimum depth of worktop is 600 mm
• Installation from cabinet width of 900 mm
• Observe casing depth of 200 mm
• In extraction and ducted recirculation mode, it must be possible to remove the rear cabinet wall for maintenance work.
• The removable cleaning hatch and access for intensive cleaning must remain accessible at all times.
• The hob must be installed so that the drip tray and the cleaning flap are easily accessible and can be removed for cleaning.
• In the case of extraction and ducted recirculation mode, the minimum plinth height is 100 mm.
• Miele recommends the DMK 150-1 for extraction mode.
• Miele recommends the DUU 1500 for ducted recirculation.
• Airflow from the DUU 1500 should be directed into an open space where possible. A sufficient distance from walls,
furniture, etc. must be observed.
• Some installation situations may require the plinth feet to be moved.
• Air discharge to the rear (non-rotatable), round exhaust duct, 150 mm diameter.
• We recommend using Miele’s flat ducting components. Please note that they are not supplied with the KMDA. To simplify planning and in-
stallation, DFKS-xR flat ducting sets are available to cover most installation situations.
• We advise against highly flexible ducting.
When installing the appliances, it must be ensured that they are accessible from below. Depending on the furniture manufacturer, incremental
sizes may vary which results in different planning options.
Note for recirculation mode:
Please add the installation option to be used to the kitchen order. (Vented recirculation mode or Plug&Play installation)
Possible
Possible – additional accessories required
– Programming has to be adjusted – additional accessories required
Extraction mode
Guided recirculation mode
Plug&Play mode
KMDA 7272 FR-A
No accessories included
Factory default settings:
• Active carbon filter saturation indicator is disabled
• Fan start-up process is adjusted so that the wall vent
can be opened even in low operation mode.
(Accessories needed: flat ducting
components + wall vent
e.g. Miele DFKS-AR)
–
–
KMDA 7272 FR-U
Accessories included:
• Plug&Play adapter
• Active carbon filter
Factory default settings:
• Active carbon filter saturation indicator is switched on
• Extended run-on time to dry the active carbon filter
and fan unit
–
(Accessories needed: flat ducting
components + recirculation box
e.g. Miele DFKS-UR; Plug&Play
adapter is not required)
(No other accessories required)
KMDA 7272 FL-A
No accessories included
Factory default settings:
• Active carbon filter saturation indicator is disabled
• Fan start-up process is adjusted so that the wall vent
can be opened even in low operation mode.
(Accessories needed: flat ducting
components + wall vent
e.g. Miele DFKS-AR)
–
–
KMDA 7272 FL-U
Accessories included:
• Plug&Play adapter
• Active carbon filter
Factory default settings:
• Active carbon filter saturation indicator is switched on
• Extended run-on time to dry the active carbon filter
and fan unit
–
(Accessories needed: flat ducting
components + recirculation box
e.g. Miele DFKS-UR; Plug&Play
adapter is not required)
(No other accessories required)
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 302
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 302
16.03.23 14:00
16.03.23 14:00
