339
DA 4208 VD
1) Installation area
2) Extraction mode (factory default)
3) Interval options in recirculation.
4) Alternative installation with spacer frame
5) Ventilation grille positioned at the top for recirculation.
6) A mains connection cable is required to connect the
cooker hood to the socket in the ceiling. In extraction
mode, flexible ducting is also required.
PUR 98 D, DA 4208 D /
DA 4208 D EXTA
1) Installation area
2) Extraction mode
3) Recirculation
4) Alternative installation with spacer frame
5) Ventilation grille positioned at the top for recirculation
6) A mains connection cable is required to connect the
cooker hood to the socket in the ceiling. In extraction
mode, flexible ducting is also required.
DA 4248 VD
1) Installation area, 2) Alternative installation with spacer
frame. 3) A mains connection cable is required to
connect the cooker hood to the socket in the ceiling;
flexible ducting is also required.
Island cooker hoods
DA 6698 D
1) Installation area
2) Extraction mode
3) Recirculation
4) Alternative installation with spacer frame
5) Ventilation grille positioned at the top for recirculation
6) A mains connection cable is required to connect the
cooker hood to the socket in the ceiling. In extraction
mode, flexible ducting is also required.
DA 9091 W
1) Installation area for power connection. 2) Cut-out for
extraction ducting to the rear. Alternative exhaust duct to
the rear. 3) Air vent for recirculation. A distance of at least
200 mm must be maintained between the top of the
appliance and the ceiling or any furniture units installed
above the appliance.
DA 9298 W
1) Installation area for power connection. 2) Cut-out for
extraction ducting to the rear. 3) Air vent for recirculation.
A distance of at least 200 mm must be maintained
between the top of the appliance and the ceiling or any
furniture units installed above the appliance.
DAW 1620
1) Extraction mode, 2) Recirculation, 3) Ventilation grille
positioned at the top for recirculation, 4+5) Installation
area (only 4 is required for recirculation)
DAW 1920
1) Extraction mode, 2) Recirculation, 3) Ventilation grille
positioned at the top for recirculation, 4+5) Installation
area (only 4 is required for recirculation)
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 339
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 339
16.03.23 14:01
16.03.23 14:01
