329
Planning notes for Black Levantar downdraft extractor
1. Design of the DAD 4x40
The DAD 4x40 Black Levantar downdraft extractor is a cooker hood
that retracts down into the worktop and is fitted inside the base unit.
When the extractor is retracted, only the glass frame and the surface
of the canopy complete with SmartControl touch panel are visible.
The fan and the electronic module for the cooker hood are hidden
inside the base unit.
When the extractor is extended, the extraction area at the top
covers the entire width of the canopy. The Hood-in-Motion function
pulls the cooker hood out 30 cm.
The 10-ply stainless steel grease filters are located behind the
glass panel. The filters are fitted upright at an angle inside the
panel. Held in place by magnets, the panel is pulled forwards for
opening and then lifted up and out.
An additional condensate tray below the filter can collect approx.
100 ml of liquid. We recommend wiping the tray dry every time
you use a cooking process that produces a lot of condensation.
DAD 4840
KM 7689 FL
KM 7684 FL
Either disposable DKF 30-P Active AirClean filters or reactivatable
DKF 30-R Longlife AirClean filters for recirculation mode can be
fitted in the internal extraction area underneath the condensate tray.
Each set contains 2 filters.
Thanks to the integration of the filter at the top and the adaptation of
the electronic module, the downdraft extractor can be installed
without the need for additional ducting to be laid. See Section 4. a)
for more detailed information.
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 329
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 329
16.03.23 14:01
16.03.23 14:01
