322
CS 7000 FL Flush-fit installation
*7+0.5 = CS7641 (wok)
All dimensions are given in mm.
When installing multiple elements, a distance of 2 mm must be maintained between the
individual elements: calculating cut-out dimension A = total width of the elements plus
2 mm distance between the elements plus 2 mm on the right and 2 mm on the left.
Calculating cut-out dimension B = cut-out dimension A minus 12 mm on the right and
12 mm on the left
When installing several SmartLine elements, an additional spacer bar must be fitted in between the individual
elements. The clips supplied with the spacer bars are only required for installing a CSDA 700x FL. Installing
3 elements and 2 spacer bars:
SmartLine installation drawings
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 322
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 322
16.03.23 14:00
16.03.23 14:00
