296
KMDA 7476 and KMDA 7634 – installation drawings
KMDA 7476 FR, KMDA 7634 FR
Frame – Surface-mounted installation
1) Front
2) The removable drip tray must be
accessible after installation
3) Mains connection box with mains
connection cable, L = 1440 mm
4) Exhaust duct, rear >220–222 x 89–90
/ R1–R19 (default setting)
5) Exhaust duct, right >220–222 x 89–
90 / R1–R19 (requires conversion)
6) Exhaust duct, left >220–222 x 89–90
/ R1–R19 (requires conversion)
KMDA 7476 FL, KMDA 7634 FL
Frameless – Surface-mounted installa-
tion
1) Front
2) The removable drip tray must be ac-
cessible after installation
3) Mains connection box with mains
connection cable, L = 1440 mm, 4) Ex-
haust duct, rear >220–222 x 89–90 /
R1–R19 (factory default)
5) Exhaust duct, right >220–222 x 89–
90 / R1–R19 (requires conversion) 6)
Exhaust duct, left >220–222 x 89–90 /
R1–R19 (requires conversion)
KMDA 7476 FL, KMDA 7634 FL
Frameless – Flush-fit installation
1) Front
2) The removable drip tray must be ac-
cessible after installation
3) Mains connection box with mains
connection cable,
L = 1440 mm, 4) Stepped cut-out
5) Wooden support frame (not sup-
plied),
6) Exhaust duct, rear >220–222 x 89–
90/R1–R19 (factory default)
7) Exhaust duct, right >220–222 x 89–
90/R1–R19 (requires conversion), 8)
Exhaust duct, left >220–222 x 89–90/
R1–R19 (requires conversion)
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 296
22-1557_Part20_Skizzen_VitroLine_Gen7000_Kurz_GB.indd 296
16.03.23 14:00
16.03.23 14:00
