67
67
64
83
39
PRODUCT CARE
Use a wet or dry soft cloth to clean the fabric or wood parts. Diluted neutral liquid deter-
gents specifi cally for wood may be used. Avoid using abrasive sponges because they could
scratch the product. Acid-based products, solvents and products containing ammonia are
not recommended. The structure comprises various parts that may slightly differ in colour
and grain. This is normal. Moreover, small knots and natural marks are natural qualities
of the wood, and not imperfections. The colour of wood changes over time and when
exposed to light. Chairs made from the same wood and bought at different times may
therefore differ slightly in colour. The over selection of woods would weaken the identity of
the product, as well as considerably increasing waste material, and impacting negatively
on the environment.
Daily maintenance and the immediate removal of stains will ensure that the upholstery
fabric remains in excellent condition. Often the upholstery can simply be cleaned with a
vacuum cleaner and regularly aired. Every now and again the fabric should be cleaned
using a fabric detergent, taking care not to make the fabric too wet or to damage the pad-
ding underneath. Never used undiluted stain removers or whitening products, ammonia or
soaps intended for solid surfaces. Most stains can be removed by using warm water. Use
a dry stain remover for oily stains. For insoluble stains (chewing gum, candle wax, etc.), fi ll
a plastic bag with ice and rub it on the stain until the substance becomes brittle. Delicately
remove the substance with a clean, fl at, blunt blade.
Leather should be regularly dusted using only a soft, dry cloth. The arms are in raw full grain
leather that has not been chemically treated, and any stains (including water or sweat) or
dirt will mark the surface permanently. Natural marks, such as wrinkles, scars or stains, are
a feature of the material, showing its genuine nature and enhancing its beauty. The leather
is not guaranteed to be uniform in colour or appearance, particularly when from different
animals. Changes in humidity and temperature, and use in general, can affect leather prod-
ucts. This is not a fault of the material.
Screws and belts should be regularly checked and tightened. This is because over time
normal use can cause components to become loose.
The product should not be exposed to the sun. Proper, regular maintenance ensures the
product remains in excellent condition and prolongs its life.
WARNING
Do not use different cleaning products from the ones mentioned above. Do not use the
product in an improper way: do not place hot objects on it, seat on the back, stand on it or
use the chair as a ladder. Once disused, please make sure this product is disposed in an
environment-friendly way.
Black / Bordeaux
Seat and back
Seat cushion
Back cover
Arms
Belt
Natural / Light blue
Seat and back
Seat cushion
Back cover
Arms
Belt
Luilor 764 black
BTX Decor Enea
Check 010
BTX Decor Lino
Froissè 5500/108
Natural leather
Red
Luilor 451 beige
Kvadrat Sacho
Acca Stripe 0731
Kvadrat Melange
Nap 791
Natural leather
Coral
Luilor 764 black
Limonta Volpe 101
Natural leather
Coral
Torri Lana side A
Luilor 764 black
Limonta Volpe 101
Natural leather
Blue
Torri Lana side B
Luilor 451 beige
Kvadrat Recheck
645
Kvadrat Melange
Nap 651
Natural leather
Violet
Luilor 451 beige
Torri Lana Baghera
799.023
Kvadrat Hero 2
0932
Natural leather
Purple
Luilor 764 black
Limonta Agamotto 21
Limonta Persiano 209
Natural leather
Blue
Luilor 764 black
Limonta Volpe 101
Limonta Blackwood
02
Natural leather
Yellow
Natural / Hella A
Seat and back
Seat cushion
Arms
Belt
Draped cover
Black / Yellow
Seat and back
Seat cushion
Back cover
Arms
Belt
Natural / Pink
Seat and back
Seat cushion
Back cover
Arms
Belt
Black / Hella B
Seat and back
Seat cushion
Arms
Belt
Draped cover
Torri Lana
Side A
Torri Lana
Side B
Black / Black & White
Seat and back
Seat cushion
Back cover
Arms
Belt
Natural / Sage
Seat and back
Seat cushion
Back cover
Arms
Belt
Low chair
