L&L Luce&Light
928
EMERGENCY KIT
NB: 3-hr battery kit available on request
DIP switch position
(dual in-line package)
Emergency work voltage
(VL)
Emergency output current
(I)
Max no. power
LEDs in current
Max power for LED
modules in voltage
A
9–12V
350mA
12/Vf
24W
B
9–24V
350mA - 250mA
24/Vf
30W
C
9–46V
350mA - 100mA
46/Vf
D
9–58V
350mA - 85mA
60/Vf
The emergency kit is designed to work with LED drivers connected in series.
When mains power is present, the emergency kit functions as a battery charger.
In the absence of mains power, it steps in to keep a connected lighting fixture powered for at least one hour.
AE01350T1
The AE01350T1 emergency unit is a very versatile device: it can function in only non-maintained or in non-maintained and
maintained light in conjunction with electronic transformers (maximum input voltage 90V, maximum input current 2A).
It can be adjusted using DIP switches and operates at constant current with power LEDs or constant voltage with LED modules.
The unit activates immediately in the event of a mains power outage and is equipped with:
• high-temperature Ni-Cd batteries, 1-hr life;
• LED charging indicator;
• protection device against extended discharges.
The unit has an IP20 ingress protection rating and complies with the standards:
EN61347-2-13, EN61347-2-7, EN61547, EN55015, EN60598-2-22, EN61000-3-2, SELV.
Technical and operating specifications:
• Supply voltage: 220V - 240V – 50Hz - 60Hz;
• Supply current: 20mA;
• Max operating temperature measured on the casing: 70°C;
• Ambient temperature: 5–50°C;
• Charge time: 24hr;
• Terminal block range: 1.5 mm2;
• LED mounting hole: Ø8.8 mm;
• Battery pack cable length: 200 mm;
• Charging device with basic isolation capable of recharging the battery normally after the test described in article 22.3 of CEI EN 61347-2-7:2007-09.
The charging device is protected against short circuits.
