931
Time / timer programmer
code colour
€
Annual timer 4-ch 324-mem DCF77
MI16 00
644,70
Annual four-channel timer with a power supply unit and
integrated DCF receiver.
To be integrated with the DCF77 antenna for radio controlled
timing synchronisation. Time and date view option on the bus.
The device can be programmed manually or via a PC with the
appropriate software.
code colour
€
DCF77 antenna
MI17 00
230,60
Antenna for receiving the time via a time signal. The antenna can
be connected to an annual programmer REG-K/4/324 DCF-77.
Light sensors / Weather stations
Switch actuators
code colour
€
Switching actuator 4x230 V - 16 A
with manual mode option and current detector
MI20 00
639,40
For controlling four electric loads independently. The actuator is
fitted with a built-in current detector that can measure the load
current on each channel.
All the outputs can be commanded using manual switches.
code colour
€
KNX light and temperature sensor
MI13 00
532,50
The sensor registers the light and temperature and transmits them
to the bus.
It is fitted with a temperature and a light sensor.
Adapted for outer wall assembly.
Weather station with 4 channels
MI14 00
1.028,30
The weather station registers and processes analogue sensor
signals indicating wind speed, light, dusk, rainfall and a
DCF77signal.
It can be fitted to any combination of up to four analogue sensors
plus the combined DCF77 weather sensor.
code colour
€
Combined DCF77 weather sensor
MI15 04
1.404,60
The combined weather sensor includes a wind sensor, a rainfall
sensor, a dusk sensor and three light sensors (east, south and
west).
Plus an integrated DCF-77 receiver, a 45° adjustable antenna
and integrated heating.
code colour
€
KNX 16 A actuator with 2 inputs
MI18 00
195,00
A 1-channel actuator with two inputs for assembly in a 60 mm
recessed case or in a ceiling-mounted socket with coupling.
The two floating contacts can be connected to two inputs.
Switch actuator 2x230 V - / 16 A with manual mode
option and current detector
MI19 00
465,40
For controlling two electric loads independently.
The actuator is fitted with a built-in current detector that can
measure current absorption on each channel.
All the outputs can be commanded using manual switches.
Switch actuators
code colour
€
Switching actuator 8x230 V - 16 A
with manual mode option and current detector
MI21 00
813,40
For controlling eight electric loads independently.
The actuator is fitted with a built-in current detector that can
measure the load current on each channel.
All the outputs can be commanded using manual switches.
Switch actuator 12x230 V -16 A with manual mode
option and current detector
MI22 00
1.167,70
For controlling twelve electric loads independently.
The actuator is fitted with a built-in current detector that can
measure the load current on each channel.
All the outputs can be commanded using manual switches.
code colour
€
REG-K/8x/16x/10 switch/blind actuator with manual
mode option
MI23 00
903,60
For controlling eight blind/shutter motors independently or for
switching sixteen loads via closure contacts. The blind or switch
channel function can be configured as required. All the blind/
switch outputs can be commanded manually using the buttons
on the front of the device.
REG-K/4x24/6 blind actuator with manual mode option
MI24 00
540,90
For controlling four blind/shutter motors independently. The blind
channel function can be configured as required. All the blind
outputs can be commanded manually using the buttons on the
front of the device.
iguzzini.com/code