929
System Components
code colour
€
BUS KNX power supply - 320 mA
MH93 00
378,40
A module adapted to generate the bus voltage required to power
a line of devices.
Current: 320 mA
BUS KNX power supply - 640 mA
MI56 00
530,40
A module adapted to generate the bus voltage required to power
a line of devices.
Current: 640 mA
KNX coupler/isolator
MH94 00
577,60
For the logic connection and electrically isolating lines and areas.
code colour
€
24 V DC / 0.4 A power supply
MI57 00
214,80
Device with integrated overload or short circuit protection fitted
on the DIN EN5022 profile and adapted to provide an auxiliary
power supply to the KNX components.
10 channel infra-red remote control
MH95 01
113,60
Interfaces / Gateways
code colour
€
USB-KNK interface
MH96 00
371,10
For connecting a programming or diagnostic device to the bus
line via a USB1.1 or USB2 interface.
KNX - DALI 64 Gateway
MH97 00
985,30
The DALI gateway connects the KNX protocol to the DALI
interface digital electronic devices.
Up to a maximum of 64 addresses can be controlled and
adjusted.
code colour
€
KNX/IP Router
MH98 00
822,90
The KNX/IP routers can also forward telegrams between lines
using the LAN (IP) as a rapid backbone.
Multi-protocol logic controller
M618 00
1.991,60
01
WHITE
iguzzini.com/code
DALI 1x 4 A relay
PA49 00
207,60
Maximum load current: 4mA
1 NO/NC contact
Maximum switching voltage 250 Vac / 35 Vdc
DALI load: 12mA.
DALI 1 logic addresses
Min load 1.2 W
Max load 1000 W for resistive load
Room temperature: Ta 0-50°C.
Free installation
DALI 4x10A relay
PA50 00
507,30
Maximum current load: 4x10A.
Input voltage: 220-240 Vac
Nominal frequency: 50/60Hz.
4 clean NO contacts
DALI load: 2mA.
DALI address: 4.
Max load
10 A for resistive load
8 A for incandescent load
5 A for inductive load
Room temperature: Ta 0-40°C.
Class I.
Installation on DIN track
Number of DIN modules: 5
DALI Booster 64
G745 00
314,50
Input voltage: 220-240 -10%, +6% Vac.
Network frequency: 50/60Hz.
DALI load: 2mA.
DALI address: 1.
Internal DALI power supply unit for 64 DALI addresses
(Max power 128 mA).
Class IP20.
Number of DIN modules: 4.
Push Dim
