492
eNet Actuators
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
eNet
4 x 250 W/VA
DRA
5431005431 00
1
42
C Necessary accessories
One of the following articles:
server DRA 5301 00
D
477
WL receiver mod. DRA 5452 00
D
478
C Optional accessories
S3000 uni.LED pow.booster DRA 2383 00
D
192
Features
- The eNet wireless dimming actuator receives telegrams for
switching and dimming various electrical loads from the eNet
wireless reception module or eNet server via a data cable.
- Switching and dimming light bulbs, HV halogen lamps, electronic
transformers for halogen or LED lamps, dimmable inductive
transformers for halogen or LED lamps, HV LED or compact
fluorescent lamps.
- Bulb-saving switch-on.
- Switch-on and minimum brightness can be saved for each
output.
- Scene operation.
- Status display of the outputs with LED.
- Status feedback to eNet wireless sensors.
- Parallel switching of several outputs to a load of 950 W possible.
- Short-circuit and excess-temperature protection.
- Automatic or manual setting of dimming process.
Can be set with eNet server:
- Maximum brightness.
- Dimming process.
- Dimming speed.
- Delay time.
- Switch-on/off delay.
- Dimming ramp up/down.
- Switch-off pre-warning.
- Permanent-on, permanent-off.
- Hotel function.
- Light control.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Power loss:
max. 8 W
Standby per output:
max. 0.3 W
Ambient temperature:
-5 °C to +45 °C
Connected load per output
- Light bulbs:
20 to 250 W
- HV halogen lamps:
20 to 250 W
- Wound transformer:
20 to 250 VA
- Wound transformer with
NV-LED:
20 to 100 VA
- Tronic transformer:
20 to 250 W
- electronic transformer with
NV-LED:
typically 20 to 100 W
- LED lamps:
typ. 3 to 50 W
- Compact fluorescent lamp:
typ. 3 to 50 W
Parallel switched outputs at
max. 95% utilization:
max. 950 W at AC 230 V, 50/60
Hz
Connections:
max. 4 mm²
Length of the data cable:
Max. 3 m
Dimensions
- Modular widths (MW):
8
Notes
- An eNet wireless reception module or an eNet server is required
to operate this DIN-rail mounting device.
DRA
5437005437 00
1
42
C Necessary accessories
One of the following articles:
server DRA 5301 00
D
477
WL receiver mod. DRA 5452 00
D
478
Features
- The eNet wireless blind actuator receives telegrams for
controlling electrically-operated hangings, e.g. blinds, shutters,
or awnings, from the eNet wireless reception module or eNet
server via a data cable.
- Positioning of blind and slat using scene call-up.
- Positions for sun protection and twilight can be saved.
- Threshold value scenes for sun protection, twilight and wind
alarms.
- Status feedback to eNet wireless transmitter.
- Hanging period can be saved.
- Slat adjustment time can be saved.
Can be set with eNet server:
- Adjustment time when changing directions.
- Motion direction can be inverted (e.g. for roof windows).
- Position for sun protection, twilight, lock-out protection, and
wind alarms.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Standby:
max. 0.2 W
Ambient temperature:
-5 °C to +45 °C
Connected load of motors:
1000 W
Connections:
max. 4 mm²
Dimensions
- Modular widths (MW):
2
Notes
- An eNet wireless reception module or an eNet server is required
to operate this DIN-rail mounting device.
eNet wireless dimming actuator, 4-gang
eNet wireless blind actuator, 1-gang
