490
eNet Actuators
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
eNet
5427005427 00
1/5
42
C Optional accessories
install.adapter mini hous. 5429 00
D
494
Features
- The eNet wireless blind actuator enables the control of
electrically operated hangings, such as blinds, shutters or
awnings.
- Positioning of blind and slat using scene call-up.
- Positions for sun protection and twilight can be saved.
- Status feedback to eNet wireless transmitter.
- Hanging period can be saved.
- Slat adjustment time can be saved.
Can be set with eNet server:
- Adjustment time when changing directions.
- Motion direction can be inverted (e.g. for roof windows).
- Position for sun protection, twilight, lock-out protection, and
wind alarms.
- Behaviour after mains power failure.
- Repeater function.
- Localisation of the device.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Standby:
max. 0.5 W
Ambient temperature:
-25 °C to +70 °C
Connected load of motors:
1000 W
Connections:
max. 4 mm²
Wireless frequency:
868.0 to 868.6 MHz
Range (free field):
approx. 100 m
Dimensions in mm
Ø 53
H 28
Notes
- Installation in device box, surface-mounted housing, or in an
installation adapter.
DRA
5433005433 00
1
42
C Necessary accessories
One of the following articles:
server DRA 5301 00
D
477
WL receiver mod. DRA 5452 00
D
478
Features
- The eNet wireless switching or wireless momentary-contact
actuator receives telegrams for switching lighting from the eNet
wireless reception module or eNet server via a data cable.
- Operating modes: Switching actuator or momentary-contact
actuator.
- Status feedback to eNet wireless transmitter.
- Scene operation.
- Operating mode buttons: Relay contact stays closed as long as
telegrams are being received (max. 60 seconds).
Can be set with eNet server:
- Flashing function.
- Delay time.
- Switch-on/off delay.
- Switch-off pre-warning.
- Minimum switching repeat time.
- Permanent-on, permanent-off.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Standby:
max. 0.2 W
Ambient temperature:
-5 °C to +45 °C
Switching capacity AC 230 V:
16 A / AC1
Connected load
- Light bulbs:
2300 W
- HV halogen lamps:
2000 W
- Wound transformer:
1000 VA
- Tronic transformer:
1500 W
- Fluorescent lamps,
uncompensated:
920 VA
- LED lamps:
typ. 500 W
- Compact fluorescent lamp:
typ. 500 W
- Capacitive load:
690 VA (560 µF)
Connections:
max. 4 mm²
Length of the data cable:
Max. 3 m
Dimensions
- Modular widths (MW):
2
Notes
- An eNet wireless reception module or an eNet server is required
to operate this DIN-rail mounting device.
eNet wireless blind actuator, 1-gang Mini
eNet wireless switching or momentary-contact
actuator, 1-gang
