488
eNet Actuators
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
eNet
5425005425 00
1/5
42
C Optional accessories
install.adapter mini hous. 5429 00
D
494
Features
- The eNet wireless switching or momentary-contact actuator
enables switching of lighting and motors.
- Operating modes: Switching actuator or momentary-contact
actuator together for both outputs.
- Status feedback to eNet wireless transmitter.
- Scene operation.
- Operating mode buttons: Relay contact stays closed as long as
telegrams are being received (max. 60 seconds).
Can be set with eNet server:
- Flashing function.
- Delay time.
- Switch-on/off delay.
- Switch-off pre-warning.
- Minimum switching repeat time.
- Permanent-on, permanent-off.
- Repeater function.
- Localisation of the device.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Standby:
max. 0.5 W
Ambient temperature:
-25 °C to +70 °C
Switching capacity AC 230 V:
16 A / AC1
Connected load
- Light bulbs:
2300 W
- HV halogen lamps:
2000 W
- Wound transformer:
1000 VA
- Tronic transformer:
1500 W
- Fluorescent lamps,
uncompensated:
920 VA
- LED lamps:
typ. 500 W
- Compact fluorescent lamp:
typ. 500 W
- Motors:
450 W
- Capacitive load:
690 VA (560 µF)
Connections:
max. 4 mm²
Wireless frequency:
868.0 to 868.6 MHz
Range (free field):
approx. 100 m
Dimensions in mm
Ø 53
H 28
Notes
- Installation in device box, surface-mounted housing, or in an
installation adapter.
20 – 250 W/VA
5420005420 00
1/5
42
C Optional accessories
install.adapter mini hous. 5429 00
D
494
S3000 uni.LED pow.booster DRA 2383 00
D
192
Features
- The eNet wireless dimming actuator enables switching and
dimming of various electrical loads.
- Switching and dimming light bulbs, HV halogen lamps, electronic
transformers for halogen or LED lamps, dimmable inductive
transformers for halogen or LED lamps, HV LED or compact
fluorescent lamps.
- Bulb-saving switch-on.
- Switch-on and minimum brightness can be saved for each
output.
- Scene operation.
- Status display with LED.
- Status feedback to eNet wireless sensors.
- Short-circuit and excess-temperature protection.
- Automatic or manual setting of dimming process.
Can be set with eNet server:
- Maximum brightness.
- Dimming process.
- Dimming speed.
- Delay time.
- Switch-on/off delay.
- Dimming ramp up/down.
- Switch-off pre-warning.
- Permanent-on, permanent-off.
- Hotel function.
- Light control.
- Repeater function.
- Localisation of the device.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Power loss:
max. 1.5 W
Standby:
max. 0.5 W
Ambient temperature:
-25 °C to +70 °C
Connected load
- Light bulbs:
20 to 250 W
- HV halogen lamps:
20 to 250 W
- Wound transformer:
20 to 250 VA
- Wound transformer with
NV-LED:
20 to 100 VA
- Tronic transformer:
20 to 250 W
- electronic transformer with
NV-LED:
typically 20 to 100 W
- LED lamps:
typ. 3 to 70 W
- Compact fluorescent lamp:
typ. 3 to 70 W
Connections:
max. 4 mm²
Wireless frequency:
868.0 to 868.6 MHz
Range (free field):
approx. 100 m
Dimensions in mm
Ø 53
H 28
Notes
- Installation in device box, surface-mounted housing, or in an
installation adapter.
eNet wireless switching actuator or momentary-
contact actuator, 2-gang Mini
eNet wireless dimming actuator, 1-gang Mini
