446
KNX Blinds
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
KNX system
devices, actuators,
sensors
Blind actuators with integrated bus coupler, manual activation, and
status display for each output. For controlling electrically operated
blinds, shutters, awnings, ventilation flaps, or similar hangings.
Features
- Curtain position can be directly controlled.
- Slat position can be directly controlled.
- Behaviour after bus voltage failure and recovery can be set.
- Separately parameterisable movement times with movement time
extension for moving into the upper end position.
- Central control of all blind outputs possible.
- Feedback of the curtain position or slat position.
- Feedback can be delayed until after the recovery of bus voltage.
- Assignments of up to five different safety functions (three wind
alarms, one rain alarm, one frost alarm) or optionally with cyclical
monitoring.
- Forced setting function can be realised for each blind output.
- Integration in scenes is possible, 8 internal scenes at the most
can be parameterised per channel.
- Memory function for light scenes.
- Sun protection function with fixed and variable curtain or slat
positions can be activated.
- Extended sun protection with extensive control functions.
- Integration in temperature management of building possible.
- Blocking of individual outputs manually or with bus.
- Active or passive (object can be read out) cyclical feedback
functions.
- Building site operation: Outputs can be operated manually
without bus voltage with operating voltage only.
Technical data
KNX medium:
TP256
Connections
- KNX:
Connection and junction terminal
- Load:
Screw terminals
Notes
- Installation on DIN top-hat rail.
DRA plus
2154002154 00
1
26
Features
- For low voltage DC 12 to 48 V.
- Independent control of the four blind outputs.
Technical data
Rated voltage:
DC 12 to 48 V
Switching voltage DC:
DC 12 to 48 V
Switching capacity
- DC 12/24 V:
6 A
- DC 48 V:
3 A
Connections:
max. 4 mm²
Dimensions
- Modular widths (MW):
4
Scope of supply
- KNX connection and junction terminal included in the scope of
supply.
DRA plus
2152002152 00
1
26
Features
- For mains voltage AC 230 V.
- Connection of various external conductors.
- Independent control of the two blind outputs.
- Automatic curtain moving time detection for AC 230 V drives
with mechanical stop position switches.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
AC switching voltage:
AC 230 V, 50/60 Hz
Switching capacity AC 230 V:
6 A / AC1
Switching voltage DC:
DC 12 to 48 V
Switching capacity
- DC 12/24 V:
6 A
- DC 48 V:
3 A
Connections:
max. 4 mm²
Dimensions
- Modular widths (MW):
4
Scope of supply
- KNX connection and junction terminal included in the scope of
supply.
DRA plus
1039001039 00
1
26
Features
- For mains voltage AC 230 V (4 channel) or low voltage DC 12 to
48 V (2 channel).
- Connection of various external conductors.
- Independent control of the four blind outputs.
- Automatic curtain moving time detection for AC 230 V drives
with mechanical stop position switches.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
AC switching voltage:
AC 230 V, 50/60 Hz
Switching capacity AC 230 V:
6 A / AC1
Switching voltage DC:
DC 12 to 48 V
Switching capacity
- DC 12/24 V:
6 A
- DC 48 V:
3 A
Connections:
max. 4 mm²
Dimensions
- Modular widths (MW):
4
Notes
- VDE approval in accordance with EN 60669-1, EN 60669-2-1.
Scope of supply
- KNX connection and junction terminal included in the scope of
supply.
Blinds
KNX blind actuator, 4-gang DC 24 V with manual
actuation
KNX blind actuator, 2-gang AC 230 V with manual
actuation
KNX blind actuator, 4-gang AC 230 V / DC 12 - 48 V
with manual actuation
Specifications
Order No.
P. unit
PS
