434
KNX Flush-mounted actuators
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
KNX system
devices, actuators,
sensors
Flush-mounted
5065005065 00
1/5
06
C Optional accessories
remote sens. 1493 00
D
370
leakage sensor 5068 00
D
461
condensation sens. 5069 00
D
461
junction box 0070 30
D
134
install.adapter mini hous. 5429 00
D
434
Power boosters
S3000 uni.LED pow.booster DRA 2383 00
D
192
Features
- Switching and dimming of light bulbs, HV halogen lamps,
dimmable HV-LED lamps, dimmable compact fluorescent lamps,
dimmable inductive transformers with LV halogen or NV-LED
lamps, dimmable electronic transformers with LV halogen or
NV-LED lamps.
- Automatic or manual selection of dimming principle according to
load.
- Idle-state, short-circuit, and excess temperature-proof
- Up to 8 independent logic functions for implementing simple or
complex logical operations.
- Actively transmitting feedback or status messages can be
delayed globally after a bus voltage recovery or ETS
programming operation.
Dimming outputs
- The load type can be specified and the dimming principle
defined: Universal (with automatic calibration procedure),
electronic transformer (capacitive/trailing edge), conventional
transformer (inductive/leading edge), LED (leading edge) or LED
(trailing edge).
- Dimming characteristic configurable in time and value range for
adaptation to the connected load.
- Dimmable range can be set (switch-on brightness; basic
brightness; alternatively: lower dimming limit and upper dimming
limit).
- Performance on receipt of an absolute brightness value can be
set (dimming, brightening, fading).
- Performance during relative dimming up in switched-off state
can be set ( switch channel on, no reaction).
- Central control function using up to 6 switching objects, 6
dimming objects and 6 value objects and collective feedback.
- Switching feedback: Active (transmitting to the bus cyclically or
when there is a change) or passive (object can be read out)
feedback function.
- Brightness value feedback: Active (transmitting to the bus
cyclically or when there is a change) or passive (object can be
read out) feedback function.
- For active feedback objects, the type of update can be set (when
the input object is changed or when the feedback value is
changed). This allows visualizations to be adapted individually.
- Feedback signals for short circuit, overload/mains power failure
and load type (KNX-compliant and extended).
- Reaction in case of bus voltage failure/recovery can be set
following an ETS programming process.
- Logical linking function for the output.
- Block function or alternative forced setting function can be
parameterised.
- Time functions (switch-on delay, switch-off delay).
- Staircase light function with advance warning function via
time-controlled reduction of lighting or activation of permanent
lighting.
- Staircase function with time extension or variable staircase time
allocation via communication object.
- Soft ON function and Soft OFF function can be set.
- Automatic switch-off can be set where brightness value < X %
(with individual delay time).
- Can be integrated in the light scenes: Up to 64 internal scenes
can be parametrised.
- Delay time for scene retrieval can be configured.
- Dimming performance can be set when a new scene is called up
(brightening, dimming, fading).
- Visual feedback when saving a scene.
- Extended scene retrieval.
- Elapsed operating time meter can be activated.
- Elapsed operating time meter as forward meter (with optional
threshold value) or backward meter (with optional starting value).
Technical data
Rated voltage:
DC 21 to 32 V SELV
Max. connected load
- Light bulbs:
20 to 230 W
- HV halogen lamps:
20 to 230 W
- Wound transformer:
20 to 210 VA
- Tronic transformer:
20 to 230 W
- Wound transformer with
NV-LED:
20 to 100 VA
- electronic transformer with
NV-LED:
typically 20 to 200 W
- HV LED lamps:
typically 1 to 200 W
Notes
- The maximum connected load depends on the operating mode
selected (leading edge or trailing edge). You will find more
detailed information in the operating instructions.
- Power reduction for installation in
Wood or drywall -15%
Multiple combinations -20%.
- Power extension using Gira power boosters.
- State of delivery: Operation of the dimming output possible via
input 1 (brighter) and input 2 (darker).
5429005429 00
1
42
C Necessary accessories
swit.act. 1-g 16 A FM 5061 00
D
432
swit./blind act. 2-g/1-g 16 A FM 5062 00
D
433
dimm.act. 1-g 200 W FM 5065 00
D
434
Features
- Surface-mounted housing for the mini actuators and
transmitters.
- For installation in intermediate ceilings, on the wall, or on top-hat
rails.
N New product.
Replaces 1058 00
KNX dimming actuator 1-gang 200 W with 3-gang
binary input
Installation adapter mini housing
