426
KNX presence and motion detector Brightness Controller / Motion detector
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
KNX presence and
motion detector
2210002210 00
1
06
C Optional accessories
mount.kit FM install. 2241 00
D
427
mount.kit SM install. 2242 00
D
427
Features
- The brightness controller is mounted to the ceiling directly above
the area to be illuminated, for example above a workplace.
- Analyses the lighting conditions of the area beneath it.
- Brightness control can be activated and deactivated via a push
button or with motion or presence detectors.
- Extreme flat installation.
- Terminal mounting on suspended ceilings.
- Ceiling mounting on stable ceilings in device box in accordance
with DIN 49073 using optional accessories.
- Surface mounted installation in surface-mounted box (optional
accessories).
- Protection type IP44 allows installation outdoors and in
moistureprone areas.
- The colour emphasis of the design rings enables their colours to
be adapted to the wall or ceiling.
- When the design ring has been removed, the programming
button of the device can be conveniently accessed from the
front.
Brightness sensor with limit value monitoring
- Up to three limit values can be set in the parameters.
- The switching, dimming value transmitter, light scene auxiliary
unit, and hysteresis functions can be configured.
- Limit value can be changed using communication object or
teach-in.
- When coupled to the lighting system, lighting is dimmed
(constant light control) or switched (2-point control) depending
upon the daylight level.
- Including block function.
Technical data
KNX medium:
TP256
Brightness sensor
- Measurement range:
10 to 2000 lx
- Detection range:
Ø approx. 5 m
Protection class:
III
Protection type:
IP44
KNX connection:
Connection and junction terminal
Installation depth:
34 mm
Ambient temperature:
-25 °C to +55 °C
Dimensions in mm
- Ceiling cut-out:
Ø 44
H -
- Dimensions (with small
design ring):
Ø 53,5
H 38
Scope of supply
- Small design ring is included in the scope of supply.
- KNX connection and junction terminal included in the scope of
supply.
pure white glossy
2194022194 02
1
06
anthracite
2194102194 10
1
06
C Optional accessories
IR remote ctrl. PIR KNX 2115 00
D
427
corner angle bracket detec.mot.Cube 0968 02
D
428
cap cab.entry mot.det.Cube 8244 ..
D
428
Features
- The PIR motion detector consists of three passive infrared (PIR)
sensors with integrated brightness sensor, integrated IR receiver
and integrated red light emitting diode (LED) for indicating
movements detected in test mode.
- Two independent light outputs.
- Light output: Switching, dimming value transmitter, and light
scene auxiliary unit can be parameterised. Fully automatic
operating mode (automatic on or off) or semi-automatic (manual
on, automatic off). Delay time can be set or dynamic delay time
can be activated. Day/night switchover. Blocking object.
- Automatic temperature-compensated sensor sensitivity.
- Sensitivity of sensors can be parameterised.
- Send brightness values cyclically or when there is a change.
- Brightness-independent presence output. A switch-on delay and
a delay time can be parameterised. The current status can be
sent cyclically, depending on the state.
- Brightness independent absence output. A switch-on delay and a
delay time can be parameterised. In this case, the delay time
expires as soon as someone enters the detection range. The
current status can be sent cyclically, depending on the state.
- Manual actuation using IR remote control.
Technical data
KNX medium:
TP256
Detection angle:
240°
Installation height of 2.50 m
- Detection range forwards,
max.:
approx. 16 m
- Range to each side, max.:
approx. 16 m
Brightness value:
2 to 1000 lx
Protection type:
IP54
Ambient temperature:
-25 °C to +55 °C
Dimensions in mm
W 87
H 87
D 85
Notes
- Suitable for ceiling or wall mounting, inside or outside.
- Optional: Can be controlled remotely using IR remote control
KNX.
Scope of supply
- Covering panel to adjust the detection range is included with
delivery.
Brightness Controller Mini
KNX brightness controller Mini
Motion detector for exterior
KNX motion detector Cube 240
