383
KNX RF hand-held transmitter KNX RF
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
KNX RF
KNX RF hand-held transmitters make the controller "mobile": From
any point in the house, the required KNX function can be triggered
conveniently by "remote control". The KNX RF hand-held
transmitters transmit KNX telegrams wirelessly when the button is
pressed, depending on the parameter setting when the application
program is loaded. These could include telegrams for switching/
pressing, dimming, or blind control. It is also possible to program
encoder functions (dimming encoders and scene auxiliary units).
Features
- Confirmation function as well as transmit and status display via
two-colour LED (red/green) separately for each button by 2-stage
display function.
- Optional status display by separate 1-bit status communication
objects.
- Transmit and confirmation display deactivatable.
- Project planning, start-up and parameter setting are performed
using ETS (version 5 or later).
- Battery-operated device.
"Switching" function
- Rocker or button function.
- Command for pressing and releasing can be parameterised (ON,
OFF, CHANGE, no reaction).
"Dimming" function
- Rocker function.
- Command when the rocker is pressed (right and left button) can
be set in the parameters (lighter - ON, darker - OFF).
"Blind" function
- Rocker function.
- Command when the rocker is pressed (right and left button) can
be set in the parameters (ON, OFF, CHANGE).
- Time between short and long-term command can be set in the
parameters.
"Value transmitter" and "Scene auxiliary unit" functions
- Rocker function.
- Command when the rocker is pressed (right and left button) can
be set in the parameters (values 0 to 255, 0 to 100% or scene
number).
- With scene auxiliary unit: Memory function possible.
Technical data
KNX medium:
RF1.R
Start-up mode:
S mode
Rated voltage:
DC 3 V
Batteries:
1 x CR 2450N
Ambient temperature:
-5 °C to +45 °C
Wireless frequency:
868.3 MHz
Transmission power:
max. 20 mW
Range (free field):
approx. 100 m
Notes
- Batteries are consumables and must be replaced regularly.
Please observe the regulations on the disposal of used batteries.
Scope of supply
- Battery is included in the scope of supply.
anthracite
5122005122 00
1
06
Technical data
Battery
- Type:
CR 2450N
- UN no.:
3091
anthracite
5124005124 00
1
06
Technical data
Battery
- Type:
CR 2450N
- UN no.:
3091
KNX RF hand-held transmitter
KNX RF hand-held transmitter, 2-gang
KNX RF hand-held transmitter, 4-gang
