382
KNX RF KNX RF pushbutton sensors
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
KNX RF
The KNX RF pushbutton sensors transmit KNX telegrams wirelessly
when the button is pressed, depending on the parameter settings
when the application program is loaded. These could be e.g.
telegrams for switching/pressing, for dimming or blind control. It is
also possible to program encoder functions (dimming encoders and
scene auxiliary units).
Features
- Confirmation function as well as transmit and status display via
two-colour LED (red/green) separately for each button by 2-stage
display function.
- Optional status display by separate 1-bit status communication
objects.
- Transmit and confirmation display deactivatable.
- The pushbutton sensor can be attached to walls using screws or
affixed to smooth or transparent surfaces using a mounting plate.
- Project planning, start-up and parameter setting are performed
using ETS (version 5 or later).
- Battery-operated device.
"Switching" function
- Rocker or button function.
- Command for pressing and releasing can be parameterised (ON,
OFF, CHANGE, no reaction).
"Dimming" function
- Rocker function.
- Command when the rocker is pressed (right and left button) can
be set in the parameters (lighter - ON, darker - OFF).
"Blind" function
- Rocker function.
- Command when the rocker is pressed (right and left button) can
be set in the parameters (ON, OFF, CHANGE).
- Time between short and long-term command can be set in the
parameters.
"Value transmitter" and "Scene auxiliary unit" functions
- Rocker function.
- Command when the rocker is pressed (right and left button) can
be set in the parameters (values 0 to 255, 0 to 100% or scene
number).
- With scene auxiliary unit: Memory function possible.
Technical data
KNX medium:
RF1.R
Start-up mode:
S mode
Rated voltage:
DC 3 V
Batteries:
1 x CR 2450N
Ambient temperature:
-5 °C to +45 °C
Wireless frequency:
868.3 MHz
Transmission power:
max. 20 mW
Range (free field):
approx. 100 m
Notes
- Batteries are consumables and must be replaced regularly.
Please observe the regulations on the disposal of used batteries.
- The pushbutton sensor is supplied with a program-neutral
start-up rocker. The suitable rocker set for the design line must
be ordered separately.
- The range can be reduced when using rocker sets and/or cover
frames.
Scope of supply
- Batteries are included in the scope of supply.
System 55
Start-up rocker
5101005101 00
1
06
C Necessary accessories
One of the following articles:
rocker set 1-g in.sp. 2131 ..
D
355
rocker set 1-g 2181 ..
D
357
rocker set 1-g inscr. 2201 ..
D
359
C Optional accessories
mount.pl.set 5339 00
D
371
sup.ring plastic 5338 00
D
371
Technical data
Battery
- Type:
CR 2450N
- UN no.:
3091
System 55
Start-up rocker
5103005103 00
1
06
C Necessary accessories
One of the following articles:
rocker set 3-g in.sp. 2133 ..
D
355
rocker set 3-g 2183 ..
D
357
rocker set 3-g inscr. 2203 ..
D
359
C Optional accessories
mount.pl.set 5339 00
D
371
sup.ring plastic 5338 00
D
371
Technical data
Battery
- Type:
CR 2450N
- UN no.:
3091
KNX RF pushbutton sensors
KNX RF pushbutton sensor, 1-gang
KNX RF pushbutton sensor, 3-gang
