368
KNX operating devices Continuous Controller, Object Controller
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
KNX operating
devices
The flush-mounted continuous controllers and the object
controllers combine the functions of a KNX bus coupler, a room
temperature controller with specified setpoint value, and a binary
input.
Features
- Four zero-voltage contacts can be connected to the binary input.
- Input 1 can be used to connect a remote sensor for the
temperature measurement in the floor.
- Two inputs can be configured as outputs (max. 0.8 mA)
- The control function is used for room temperature control. The
controller detects the current room temperature with an internal
or external temperature sensor and computes an adjustment size
using it and an adjustable temperature setpoint value. Valve
drives can be controlled with a constant adjustment signal or
with a switching adjustment signal here.
Controller
- 5 operating modes: Komfort, standby, night, frost or heat
protection, and controller lock-out (e.g. dew-point mode).
- Heating/cooling functions: Heating, cooling, heating and cooling,
basic and additional heating, basic and additional cooling.
- Preset control parameters for common radiators or cooling units.
- Controller deactivatable (dewpoint operation) or controller or
operation of the controller can be blocked.
- Valve protection function (valve is opened cyclically every 24
hours).
- Control types: Continuous PI control, switching PI control (PWM),
and switching 2-point control (on/off)
- Temperature detection via an internal and/or external sensor
(average value calculation for large areas).
Inputs
- Free assignment of the functions switching, dimming, blind and
value transmitter to the inputs.
- Blocker for blocking individual inputs.
- Behaviour upon bus voltage recovery can be configured
separately for each input.
- Telegram rate limit.
- Switching function: two independent switching objects are
available for each existing input and can be enabled individually,
command for leading and trailing edge can be set independently
(ON, OFF, CHANGE, no reaction).
- Dimming function: single-surface and double-surface operation,
time between dimming and switching, and dim-step size can be
set, telegram repetition and stop telegram transmission possible.
- Blind function: Command can be set with rising edge (no
function, UP, DOWN, CHANGE), operating concept can be
configured (Step - Move - Step or Move - Step), time between
short and long-term operation can be set, slat adjustment time
can be set.
- Value transmitter and light scene auxiliary unit function: edge
(button as NO contact, button as NC contact, switch) and value
with edge can be configured, value adjustment by pressing and
holding a button for value transmitters possible, light scene
auxiliary unit with/without memory function.
- Temperature sensor function: One channel of the button interface
can be used as an external temperature sensor for the room
temperature controller.
Outputs
- Independent switching of a maximum of 2 outputs.
Technical data
KNX medium:
TP256
Ambient temperature:
-5 °C to +45 °C
Cable length
- Inputs and outputs:
max. 5 m
- Temperature sensor:
max. 50 m
Notes
- No separate bus coupler is required.
- The use of a switch terminal box for connection of the external
inputs is recommended.
System 55
cream white glossy
2100012100 01
1
06
pure white glossy
2100032100 03
1
06
pure white matt
2100272100 27
1
06
anthracite
2100282100 28
1
06
colour aluminium
2100262100 26
1
06
black matt
21000052100 005
1
06
grey matt
21000152100 015
1
06
stainless steel
21006002100 600
1
06
C Optional accessories
remote sens. 1493 00
D
370
condensation sens. 5069 00
D
461
leakage sensor 5068 00
D
461
Features
- The temperature setpoint is shifted with the adjustment dial.
- A presence button is used to switch between Comfort and
Stand-by mode.
- The current states are indicated on the continuous controller with
LEDs.
Technical data
Installation depth:
23 mm
Connections
- J-Y(St)Y:
2 × 2 × 0.8 mm²
System 55
cream white glossy
2101012101 01
1
06
pure white glossy
2101032101 03
1
06
pure white matt
2101272101 27
1
06
anthracite
2101282101 28
1
06
colour aluminium
2101262101 26
1
06
black matt
21010052101 005
1
06
grey matt
21010152101 015
1
06
stainless steel
21016002101 600
1
06
C Optional accessories
remote sens. 1493 00
D
370
condensation sens. 5069 00
D
461
leakage sensor 5068 00
D
461
Technical data
Installation depth:
23 mm
Connections
- J-Y(St)Y:
2 × 2 × 0.8 mm²
Notes
- The object controller has no operating or display elements.
Continuous Controller and Object Controller with button
interface, 4-gang
KNX continuous controller with button interface,
4-gang
KNX object controller with button interface,
4-gang
