346
KNX operating devices Pushbutton sensor 4
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
KNX operating
devices
Features
- Pushbutton sensor with integrated bus coupler and the option of
connecting a wired remote sensor.
- Pushbutton sensor 4 must be completed with rocker sets to be
ordered separately.
The operating surfaces of the rocker sets are made of high-
quality three-millimetre thick real material such as glass,
stainless steel or aluminium.
- Rocker or button function can be set for each operating surface.
- Tactile feedback when a button is pressed.
- Functions: Switching, dimming, blinds, value transmitter, scene
auxiliary unit, 2-channel operation and controller auxiliary unit.
- Switching: Reaction when pressed and/or released, switching on,
switching off, changing over.
- Dimming: Times for short and long actuations, dimming in
different levels, telegram repetition in the event of long actuation,
sending a stop telegram at the end of actuation.
- Blind controller: four different operating concepts with times for
short and long actuation and slat adjustment.
- Value transmitter function: Value range selection, value on
actuation.
- Scene auxiliary unit: with or without storage function, calling up
internal scenes with or without storage function.
- 2-channel operation: The operation of two independent channels
can be set for every rocker or every button. This allows up to two
telegrams to be sent on the bus at the push of a button. The
channels can be parametrised independently of each other for
switching, value transmitting or scene functions.
Controller auxiliary unit properties
- An external room temperature controller can be controlled with
the controller auxiliary unit button function.
- Operating mode switching, forced operating mode switching,
presence function and target value adjustment.
- Evaluation of the controller status via status LED.
Functions of the status LEDs
- Every status LED can be parametrised independently of the
operating surface.
- The status LEDs can light up in red, green, blue, yellow, cyan,
orange, violet or white as required.
- Status LED functions: always OFF, always ON, actuation display,
telegram acknowledgement, status display, inverted status
display, activation via a separate LED object, operating state
display, controller status display, presence status display and
inverted presence status display.
- In addition, a superordinate function can be enabled for every
status LED, allowing another colour and display type to be set.
General functions
- Alarm message LED: All LEDs of the pushbutton sensor can flash
red simultaneously in the event of an alarm message.
- Orientation lighting LED: For orientation, all LEDs can be
switched off or on permanently, indicate the status of a separate
communication object (ON, OFF, flashing) or be switched on
when a button is pressed and automatically switched off again
after a delay time passes.
- Night-time reduction LED: Control of the brightness of all status
LEDs via a communication object. This means that the brightness
can be reduced to a value configured in the ETS during night
hours.
- Function for disabling individual buttons or rockers.
- Scene function: Internal storage of up to eight scenes with eight
output channels.
- Temperature measurement: Room temperature measurement
by internal sensors, internal and wired remote sensors or internal
and external sensors.
- Room humidity measurement: Measurement of the room
humidity by internal sensors.
- Disassembly safeguard
- Rockers can be customised via the Gira Inscription Service.
- Rocker sets with up to 3 mm thick real material available
separately.
- KNX Data Secure prepared.
- Firmware can be updated using the Gira ETS Service App
(additional software).
Technical data
KNX medium:
TP256
KNX connection:
Connection and junction terminal
Protection class:
III
Installation depth:
16 mm
Keypad:
95 x 95 mm
Ambient temperature:
-5 °C to +45 °C
Notes
- Professional labelling with the Gira Inscription Service www.
marking.gira.com.
Scope of supply
- KNX connection and junction terminal included in the scope of
supply.
- The pushbutton sensor is supplied with a program-neutral
start-up rocker. The suitable rocker set for the design line must
be ordered separately.
white
50010035001 003
1
06
anthracite
50010285001 028
1
06
C Necessary accessories
One of the following articles:
rocker set 1-g PB sens.4 5021 ..
D
348
rocker set 1-g inscr. PB sens.4 5031 ..
D
349
C Optional accessories
remote sens. 1493 00
D
370
white
50020035002 003
1
06
anthracite
50020285002 028
1
06
C Necessary accessories
One of the following articles:
rocker set 2-g PB sens.4 5022 ..
D
348
rocker set 2-g inscr. PB sens.4 5032 ..
D
349
C Optional accessories
remote sens. 1493 00
D
370
Pushbutton sensor 4
KNX pushbutton sensor 4 Komfort, 1-gang
KNX pushbutton sensor 4 Komfort, 2-gang
