313
Video accessories / Accessories Door communication system devices
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
Door
communication
system devices
1273001273 00
1/5
18
C Necessary accessories
One of the following articles:
colour camera door st. 1265 ..
D
284
built-in spkeaker 1258 00
D
287
en.prof. 4x empty u. 1400 mm 1354 ..
D
148
en.prof. 4x empty u. 1600 mm 1356 ..
D
148
en.prof. light el. + 3x empty u. 1600 mm 1353 ..
D
149
Features
- Set of 6-pole audio connection cable and 2-pole video connection
cable for remote operation of the colour camera.
Technical data
Length:
50 cm
Notes
- The cable set is required when the colour camera is to be
mounted offset from the door station or the built-in speaker, or
when several empty units must be bridged between the colour
camera and the door station (bus coupler) during installation in
the Gira energy profile.
1210001210 00
1/5
18
C Necessary accessories
One of the following articles:
SM home st. 1250 ..
D
296
SM video home st. Plus 1239 ..
D
295
home st. 1280 ..
C Optional accessories
DCS swit.act. DRA 1289 00
D
310
DCS FM swit.act. 1211 00
D
310
Features
- The DCS button interface, 2-gang is used to implement a
zero-voltage button signal on the Gira door communication BUS.
- The DCS button interface has two mutually independent inputs
for the connection of zero-voltage buttons.
- The inputs can either be used for triggering a switching action
(e.g. switching lights) via a switching actuator or flush-mounted
switching actuator, or it can be assigned to a home station.
- The DCS button interface is intended for installation in a device
box behind a conventional button.
Technical data
Power supply:
via the 2-wire bus
Ambient temperature:
-5 °C to +50 °C
Dimensions in mm
W 43
H 28
D 15
Notes
- The button is connected via a 3.wire connection line which is
approx. 20 cm long. This connection line can be extended to a
maximum of 5 m.
- If the button interface is assigned to a home station, the two
inputs have differing functions:
Input 1 triggers a floor call. This input is required when only a
two-wire cable is available for connecting a home station
including the floor-call button (e.g. when retrofitting an existing
door intercom).
Input 2 triggers a door call. This input is required when the
automatic door opener of the home station is to be triggered via
a mechanical button.
Set of audio/video connection cables 50 cm
Accessories
DCS button interface, 2-gang
