310
Door communication system devices Switching actuators
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
Door
communication
system devices
DRA
1289001289 00
1
18
C Necessary accessories
One of the following articles:
audio ctrl.dev. DRA 1287 00
D
306
video ctrl.dev. DRA 1288 00
D
306
Features
- Switching actuator for switching light, controlling a door opener
on back/side doors or other functions via the Gira door
communication bus.
- Control of a zero-voltage switching contact 230 V / 10 A via the
2-wire bus.
- The switching actuator can be controlled via:
the buttons "Door" and "Light" on the home station,
the call button on the door station,
the call button on the home station.
- The switching actuator can be used in five different operating
modes: switching, timer/sec., timer/min., pulse, and door opener.
- Impulse function for controlling existing automatic staircase
mechanisms.
- Binary input for switching functions via a connected mechanical
push button.
- Switching time can be adjusted continuously from 1 to 10 s or 1
to 10 min., depending on the function set.
Technical data
Power supply:
via the 2-wire bus
Zero-voltage relay contact
- either:
10 A at AC 230 V
- either:
2 A at DC 30 V
Number of call buttons that can
be taught in:
max. 16
Ambient temperature:
-5 °C to +45 °C
Dimensions
- Modular widths (MW):
2
Notes
- The switching actuator is intended to be installed in the sub-
distribution. If this is not possible, use a common surface-
mounted distributor.
- This component enables door communication systems with more
than 30 devices to be set up.
1211001211 00
1/5
18
C Necessary accessories
One of the following articles:
audio ctrl.dev. DRA 1287 00
D
306
video ctrl.dev. DRA 1288 00
D
306
Features
- Flush-mounted switching actuator for controlling an external
gong or other device via the Gira door communication bus.
- Control of a zero-voltage switching contact (24 V SELV/ 50 µA to
1.6 A AC/DC) via the 2-wire bus.
- The flush-mounted switching actuator can be controlled via:
the buttons "Door" and "Light" on the home station,
the floor-call button of the home station,
the call button on the door station, the call button on the home
station,
a zero-voltage button (in conjunction with the 2-gang door
communication button interface).
- The flush-mounted switching actuator can be used in four
different operating modes: switching, timer/sec., timer/min., and
pulse.
- Impulse function for controlling existing automatic staircase
mechanisms.
- Switching time can be adjusted continuously from 1 to 10 s or 1
to 10 min., depending on the function set.
- LED display for programming, function selection, and time
setting.
Technical data
Power supply:
via the 2-wire bus
Zero-voltage relay contact:
50 µA to 1.6 A at AC/
DC 24 V SELV
Number of call buttons that can
be taught in:
max. 16
Ambient temperature:
-5 °C to +50 °C
Dimensions in mm
- Flush-mounted switching
actuator:
W 43
H 28
D 15
Notes
- The flush-mounted switching actuator is intended for installation
in a deep device box (60 mm deep) behind a door communication
bus coupler.
Switching actuators
DCS switching actuator
Flush-mounted DCS switching actuator
