197
Room climate Gira System 3000
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
System 3000
Inserts, top units
5395005395 00
1/5
02
C Necessary accessories
One of the following articles:
System 3000 room temperature controller
S3000 RTC Display 5393 ..
D
201
S3000 RTC BT 5394 ..
D
201
KNX RF operating top units
KNX RF op.top 1-g 5104 ..
D
380
KNX RF op.top 1-g arrows 5105 ..
D
380
KNX RF op.top 1-g heat.mode 5106 ..
D
380
KNX RF op.top 2-g 5107 ..
D
380
KNX RF op.top 2-g arrows 5108 ..
D
381
C Optional accessories
therm.servo 230 V 2169 00
D
266
remote sens. 1493 00
D
370
Features
- Switching of electric underfloor heating systems and thermal
servos.
- Output signal: Pulse width modulation (PWM) or two-point
control (On/Off).
- Input for switching over to cooling mode.
- Interrupts the heating process after 60 minutes (overheating
protection of a heater).
- Connection of a remote sensor (accessory) possible.
Combination with KNX RF operating top unit, 1-gang/2-gang
- Heating actuator, 1-gang
- Sensor channel, 1-gang or 2-gang.
- Local control of System 3000 insert possible.
- Wireless control of other KNX devices as sensor possible.
- Temperature detection.
- Insert function selection for room temperature controller:
Control of 230 V servos, heating mode, cooling mode, heating
and cooling mode, PWM and 2-point controller, absolute and
relative setpoint setting, heating requirement control incl.
cascading, valve protection function.
Auxiliary input is used to switch between heating and cooling
mode.
Alternatively, the auxiliary input can be used as an additional
operating point for the System 3000 insert or for wireless control
of other KNX devices as a sensor.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Standby:
0.1 to 0.5 W
Switching current:
10 mA to 16 A
Connected load:
max. 3600 W
Recommended installation
height:
1.50 m
Installation depth:
24 mm
Installation:
in device box pursuant to DIN
49073
Ambient temperature:
-5 °C to +45 °C
2460002460 00
1/5
02
C Necessary accessories
cov. knob 0650 ..
C Optional accessories
S3000 rot.aux.ins. 3-wire 2389 00
S3000 aux.ins. 2-wire 5408 00
rocker btn NO con. 0151 00
Features
- Speed regulator for single-phase motors such as induction or
shaded-pole motors.
- Device operates on phase angle control principle.
- Switch on by soft start to maximum speed.
- Minimum speed can be persistently stored.
- Connecting auxiliary units is possible.
- Electronic short-circuit protection.
- Electronic excess-temperature protection.
- Operation with and without neutral conductor connection.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Standby:
≤ 0.5 W
Switching current at +25 °C:
Max. motor current (Imax)
60 mA to 1.8 A
1.8 A
Auxiliary inputs
- Non-illuminated mechanical
buttons:
unlimited
- Auxiliary insert, 2-wire:
unlimited
- Rotary auxiliary insert, 3-wire:
Max. 10
Installation:
in device box pursuant to
DIN 49073
Installation depth:
24 mm
Ambient temperature:
-5 °C to +45 °C
Notes
- If the ambient temperature is higher than 25 °C, the connected
load must be reduced.
System 3000 room climate
System 3000 room temperature controller insert
with sensor connection
N New product.
Replaces 0314 00.
System 3000 speed regulator insert
