190
Gira System 3000 Dimming
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
Price system (PS) ≠ 1, 14: reduced discount
System 3000
Inserts, top units
5402005402 00
1/5
02
C Necessary accessories
One of the following articles:
S3000 op.top 2-g 5362 ..
D
199
See listing at
S3000 uni.LED dimm.ins. Standard 5400 00
D
188
C Optional accessories
compensation mod. LED 2375 00
D
219
Auxiliary inputs
S3000 aux.ins. 2-wire 5408 00
D
194
S3000 aux.ins. 3-wire 5409 00
D
194
S3000 rot.aux.ins. 3-wire 2389 00
D
195
rocker btn NO con. 0151 00
D
165
Power booster
S3000 uni.LED pow.booster DRA 2383 00
D
192
Features
- Two independent outputs for two lamp groups.
- Switching and dimming light bulbs, HV halogen lamps, electronic
transformers for halogen or LED lamps, dimmable inductive
transformers for halogen or LED lamps, HV LED or compact
fluorescent lamps.
- Connecting auxiliary units is possible.
- Using a System 3000 auxiliary insert, 3-wire together with a
System 3000 operating top unit, 2-gang, both outputs can be
operated separately.
- Automatic or manual setting of dimming principle according to
load (leading or trailing edge).
- Display of the selected operating mode using LED.
- Bulb-saving switch-on.
- Switch-on brightness can be saved permanently.
- Switch on with the last brightness set, or a saved switch-on
brightness.
- Minimum brightness can be set.
- Electronic short-circuit protection.
- Electronic excess-temperature protection.
- Operation with and without neutral conductor connection.
- Pushbutton dimmer.
Combination with KNX RF operating top unit, 1-gang/2-gang
- Dimming actuator, 1-gang.
- Sensor channel, 1-gang or 2-gang.
- Local control of System 3000 insert possible.
- Wireless control of other KNX devices as sensor possible.
- Insert function selection:
Dimming principle adjustable, staircase function, scene function,
blocking function, time delays.
Auxiliary input can be used as an additional operating point for
the System 3000 insert or for wireless control of other KNX
devices as a sensor.
Technical data
Rated voltage:
AC 230 V, 50/60 Hz
Standby:
0.1 to 0.5 W
Connected load at 25°C per output
- HV LED lamps (leading edge):
typ. 3 to 50 W
- HV LED lamps (trailing edge):
typ. 3 to 100 W
- Compact fluorescent lamp:
typ. 3 to 50 W
- Light bulbs:
20 to 210 W
- HV halogen lamps:
20 to 210 W
- Gira tronic transformers:
20 to 210 W
- Electronic transformer with
LV LED (leading edge):
typically 20 to 50 W
- Electronic transformer with
LV LED (trailing edge):
typically 20 to 100 W
- Wound transformer:
20 to 210 VA
- Wound transformer with
NV-LED:
typically 20 to 50 VA
Auxiliary inputs
- Non-illuminated mechanical
buttons:
unlimited
- Auxiliary insert, 2-wire:
unlimited
- Auxiliary insert, 3-wire:
max. 10
Cable length
- Load:
max. 100 m
- Auxiliary unit:
max. 100 m
Installation depth:
30 mm
Installation:
in device box pursuant to DIN
49073
Ambient temperature:
-5 °C to +45 °C
Notes
- In general, operating the dimmer without connecting a neutral
conductor is possible, although some LED and CFLi light sources
require the neutral conductor connection to prevent flickering.
- For operation without a neutral conductor, the minimum load for
light bulbs, HV halogen lamps, Tronic transformers, and wound
transformers increases to 50 W.
- Electronic transformers and ballast devices for LED lamps can be
operated with the dimming procedure stated by the
manufacturer.
- If the ambient temperature is higher than 25 °C, the connected
load must be reduced.
System 3000 universal LED dimming insert
Komfort 2-gang
