425
The Gira Dual Q smoke alarm
device is supplied with power
by a 9-volt block battery. The
automatic function test regularly
checks the supply voltage and
the function of the smoke alarm
device.
If the battery voltage drops below
a defined point, the smoke alarm
device signals for 30 days that the
device must be replaced. During
this time, the smoke alarm device
is fully functional. The integrated
twilight sensor mutes the battery
warning signal when it gets dark.
Application as an individual device
Connection of up to 40 devices via the 2-wire cable
Connection options with the
wireless module
If equipped with an optional
wireless module, the Gira Dual Q
smoke alarm device can be
integrated into the Gira eNet
system using the Gira eNet
wireless converter. A transmitter
range of 100 m (open field) per
wireless module can be achieved.
If a smoke alarm device with
wireless module is programmed
as a repeater, the range can be
increased even further. In addition,
it is possible to integrate the
Gira Dual Q smoke alarm device
with wireless module into existing
installations of Gira Dual/VdS
smoke alarm devices with
wireless modules.
Connection of a maximum of 40 devices via wireless bus system
+
+
Combined connection of up to 40 devices using the Gira eNet system
by means of the Gira eNet wireless transmitter – for example, blinds,
lighting, or alarm
+
+
Wireless actuators
Connection options with
the KNX module for the Dual
smoke alarm device
The optional KNX module
enables the Gira Dual Q smoke
alarm device to be connected
to the KNX system.
If the device registers fire or
smoke accumulation, the module
forwards the signal to the KNX
system, which reacts intelligently
to the risk of fire. The KNX
module is supplied with power
via the KNX cable. Any number
of devices can be connected.
Connect any number of devices via the Gira KNX system
+
+
+
KNX cable
Connection options with the
relay module
If equipped with an optional
relay module, the Gira Dual Q
smoke alarm device can be
connected to external alarm
devices, such as a horn or
warning light.
In addition, alarm and fault
messages, e.g. on a TeleCoppler
or alarm control unit, can be
switched or forwarded to the
KNX system via a pushbutton
interface.
Connection of additional devices such as a pushbutton interface,
TeleCoppler or horn via the relay module
+
Dual Q smoke alarm device
Gira Dual Q smoke alarm device: options, product range
Gira Dual Q smoke alarm device: networking options
Smoke Alarm Device Q / Accessories Smoke alarm device
Specifications
Order No.
P. unit
PS
Specifications
Order No.
P. unit
PS
Gira electrical installation systems
The delivery results subject to countries specific assortments.
Smoke alarm device
Security
pure white glossy
Only for countries with the
official languages de, it.
1145021145 02
1
03
pure white glossy
Only for countries with the
official languages de, en, fr, nl.
1149021149 02
1
03
pure white glossy
Only for countries with the
official languages de, fr, it, nl.
2336022336 02
1
03
pure white glossy
Only for countries with the
official languages da, en, es, is,
no, sv.
2346022346 02
1
03
C Optional accessories
relay mod. SAD Dual 2340 00
D
425
KNX module SAD Dual 2343 00
D
425
WL mod. SAD Dual Q 2347 00
D
425
set spacer sleeves screws 2342 00
D
425
2340002340 00
1
03
C Necessary accessories
SAD 2346 02
D
425
2343002343 00
1/5
46
C Necessary accessories
SAD 2346 02
D
425
2347002347 00
1
03
C Necessary accessories
SAD 2346 02
D
425
C Optional accessories
Converters on eNet
WL converter interm.plug 5323 02
D
403
WL diag.tool SAD Dual + WL mod. 2333 00
D
425
2333002333 00
1
09
C Necessary accessories
WL mod. SAD Dual Q 2347 00
D
425
2342002342 00
1
03
C Necessary accessories
SAD 2346 02
D
425
Smoke Alarm Device Q
Smoke alarm device Basic Q
Smoke alarm device Dual Q
Accessories
Relay module for smoke alarm device Dual
KNX module for smoke alarm device Dual
Wireless module for smoke alarm device Dual Q
Wireless diagnostic tool
Set of spacer sleeves and screws
