Vario induction cooktop 400 series
V I 414
V I 414 105
Frameless.
Width 38 cm.
Knob needs to be ordered separately.
Necessary Installation accessories
CK I 410 010
Stainless steel knob 400 series
for VI 414.
Electronic control.
Set of 1 knob.
CK I 410 000
Black knob 400 series for VI 414.
Electronic control.
Set of 1 knob.
Installation accessories
V A 420 004
Connection strip for combination with
other Vario appliances of the
400 series for flush mounting.
Special accessories
W P 400 001
Wok pan made of multiple-layer
material.
With round bottom and handle,
ø 36 cm, 6 litres, height 10 cm.
W Z 400 000
Wok attachment for wok pan.
Only for Vario induction cooktops.
Highlights
— 32 cm cooking zone with booster
function.
— Solid stainless steel knob, also
selectable with black robust
finishing, for precise control and
personalisation.
— Frameless for flush mounting.
— Ideal for the original wok pan with
round bottom, with wok ring.
— Can be combined perfectly with
other Vario appliances of the
400 series.
Cooking zones
1 induction cooking zone ø 21 cm
(2200 W, with booster 3700 W),
automatically switches to ø 26 cm
(2600 W, with booster 3700 W) and to
ø 32 cm (3300 W, with booster 3700 W).
Handling
Control knobs with illuminated ring,
cooking zone and output level
markings.
Electronic power control in 12 output
levels.
User friendly control with bicoloured
display (white / orange).
Features
Frying sensor function.
Booster function.
Stopwatch.
Short-term timer.
Options menu.
Power management.
Selected digital services
(Home Connect)
Cooktop-based ventilation control
(with suitable hood).
Remote monitoring.
Remote diagnostics.
Please read additional information on
Home Connect on page 409.
Safety
Operation indicator.
Pot detection.
2-stage residual heat indication.
Safety shut-off.
Planning notes
The drawing "Installation of the
control knob" must be observed if the
panel is more than 23 mm thick (there
must be a recess at the rear).
The bearing capacity and stability, in
the case of thinner worktops in
particular, must be supported using
suitable substructures. Take into
account the appliance weight and
additional loads.
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the worktop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
Special accessories
(order as spare parts):
Part No. 17006018
Frying sensor pan, ø 20 cm
Part No. 17006184
Frying sensor pan, ø 24 cm
Part No. 17006185
Frying sensor pan, ø 28 cm
Part No. 17006019
Frying sensor pan, ø 32 cm
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 9 kg.
Please read the installation details
regarding air ducting on page 212.
Please read additional planning notes
on page 132–136.
Connection
Total connected load 3.7 kW.
Connecting cable 1.5 m without plug.
Connecting cables 0.3 m and 1 m for
control knobs.
Power consumption tandby/
display off 0.5 W.
Power consumption tandby/
network 1.4 W.
Please check the user manual for how
to switch off the WiFi module.
Length of connection cable, water
in- and outlet see detailed drawing on
page 117.
Vario cooktops
116
