Planning examples for combinations of integrated induction modules 400 series
Good to know — for correct planning and installation
— Can only be combined with 12 mm Dekton.
— Minimum distances are mandatory.
— No other cut-outs are allowed in the same worktop piece. The worktop can consist of several pieces with joints between them to realize further cut-outs (e.g.sink).
— Holes and cooking zone markings must be pre-elaborated in the Dekton worktop by the recommended and trained fabricators.
— For a list of recommended fabricators, please contact your local representative.
— For Dekton fabricators: Refer to Specification sheet “Marking and drilling protocol for Gaggenau Induction” by Cosentino.
Planning Example 1
Combination of two medium modules — CU 421 100 and CU 421 100
Planning Example 2
Combination of one medium and one large module — CU 421 100 and CU 428 100
Planning Example 3
Combination two large modules — CU 428 100 and CU 428 100
List of components (stainless steel knobs)
— 2 x CU 421 100 (Integrated induction module ø 21 cm)
— 2 x CKU 410 010 (1 knob, integrated induction, stainless steel)
— 1 x CA 420 000 (Installation kit integrated induction)
— 1 x SP 410 000 (Enhanced Surface Protector for pots and pans ø 10–14 cm)
— 1 x SP 415 000 (Enhanced Surface Protector for pots and pans ø 15–18 cm)
— 1 x SP 419 000 (Enhanced Surface Protector for pots and pans ø 19–23 cm)
List of components (black knobs)
— 2 x CU 421 100 (Integrated induction module ø 21 cm)
— 2 x CKU 410 000 (1 knob, integrated induction, black)
— 1 x CA 420 000 (Installation kit integrated induction)
— 1 x SP 410 000 (Enhanced Surface Protector for pots and pans ø 10–14 cm)
— 1 x SP 415 000 (Enhanced Surface Protector for pots and pans ø 15–18 cm)
— 1 x SP 419 000 (Enhanced Surface Protector for pots and pans ø 19–23 cm)
Recommended ventilation solutions
— AC 400 (1 filter module)
— AC 250
List of components (stainless steel knobs)
— 1 x CU 421 100 (Integrated induction module ø 21 cm)
— 1 x CU 428 100 (Integrated induction module ø 28 cm)
— 2 x CKU 410 010 (1 knob, integrated induction, stainless steel)
— 1 x CA 420 000 (Installation kit integrated induction)
— 1 x SP 400 000 (Set of 4 enhanced Surface Protector
for pots and pans ø 10—28 cm)
List of components (black knobs)
— 1 x CU 421 100 (Integrated induction module ø 21 cm)
— 1 x CU 428 100 (Integrated induction module ø 28 cm)
— 2 x CKU 410 000 (1 knob, integrated induction, black)
— 1 x CA 420 000 (Installation kit integrated induction)
— 1 x SP 400 000 (Set of 4 enhanced Surface Protector
for pots and pans ø 10—28 cm)
Recommended ventilation solutions
— AC 400 (1 filter module)
— AC 250
List of components (stainless steel knobs)
— 2 x CU 428 100 (Integrated induction module ø 28 cm)
— 2 x CKU 410 010 (1 knob, integrated induction, stainless steel)
— 1 x CA 420 000 (Installation kit integrated induction)
— 1 x SP 415 000 Enhanced Surface Protector for pots and pans ø 15–18 cm
— 1 x SP 419 000 Enhanced Surface Protector for pots and pans ø 19–23 cm
— 1 x SP 424 000 Enhanced Surface Protector for pots and pans ø 24–28 cm
List of components (black knobs)
— 2 x CU 428 100 (Integrated induction module ø 28 cm)
— 2 x CKU 410 000 (1 knob, integrated induction, black)
— 1 x CA 420 000 (Installation kit integrated induction)
— 1 x SP 415 000 Enhanced Surface Protector for pots and pans ø 15–18 cm
— 1 x SP 419 000 Enhanced Surface Protector for pots and pans ø 19–23 cm
— 1 x SP 424 000 Enhanced Surface Protector for pots and pans ø 24–28 cm
Recommended ventilation solutions
— AC 400 (1 filter module with fume collector or 2 filter modules)
— AC 250
All measurements in mm.
Measurements in mm
12
322
322
≥ 800
≥ 400
≥ 400
≥ 350
≥ 350
≥ 350
≥ 1050
> 35
ø 10
Measurements in mm
12
506
322
≥ 800
≥ 400
≥ 400
≥ 350
≥ 450
≥ 400
≥ 1200
> 35
ø 10
Measurements in mm
12
506
506
≥ 800
≥ 400
≥ 400
≥ 400
≥ 400
≥ 550
≥ 1350
> 35
ø 10
Cooktops
172
