443
Melrie
MELRIE
65
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
FLUORESCENT VERSION:
Class A
TC-DEL/G24q-1
A
FLUORESCENT VERSION:
Class A
TC-DEL/G24q-3
A
HALOGEN VERSION:
Class D
QT26/E14
D
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
• Luminaire for installation on wall – surface mounted.
• Configuration: polycarbonate structure and die-cast
aluminium cover and base (MaxiMelrie only), EN AB-47100
alloy (low copper content)
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders that are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components that have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: Melrie: II; MaxiMelrie: I
• Installation: Melrie: wiring through two rubber cable
holders
(5mm<Ø<10mm
cables);
MaxiMelrie:
wiring
through two rubber cable holders (8mm<Ø<13mm cables).
Outdoor use requires suitable flexible cables assuring the
watertightness of the cable holder.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
The fitting is
equipped with
2 cable input
Protection against
impact.
IK 09 - 10,00 joule
Wall fitting
FLUORESCENT VERSION:
Class A
TC-DEL/G24q-1
TC-DEL/G24q-3
HALOGEN VERSION:
Class D
QT26/E14
