259
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
KIRK
65
Kirk
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
Floor installation
Ceiling fitting
Wall fitting
Protection against
impact
IK 06 - 1,00 joule
• Adjustable projector for installation on ceiling, wall or floor.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content) and AISI 316L fixing plate. Glass
diffuser: extra clear with silkscreen border, fixed to the
aluminium through a robotic gluing system. The wiring
unit and the emitting unit are connected by an adjustable
junction.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN60598-1 standards
• Class of insulation: I
• Installation: the luminaire is for direct connection to 220-
230V with a LED module set to work directly connected
to the mains. The luminaire is equipped with an AISI316L
stainless steel fixing plate for installation on surface and
IP68 connector (6<Ø<8mm cable). Ground spike available
on request.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
.12 Forest Green
