203
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
TALIA
65
Talia
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
Protection against
impact.
IK 08 - 5,00 joule
Pre-wired with approx
200mm of cable
Bollard light
• Bollard light.
• Configuration:
extruded
aluminium
structure.
Polycarbonate diffuser: opal UV-stabilised.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: II
• Installation: The LED module is housed in a sealed
transparent polycarbonate cylinder with compensation
valve. The luminaire is equipped with a piece of cable
and a wiring kit with crimp connectors and an adhesive
heat-shrink tubing for a watertight electrical connection.
We recommend installation on a concrete basement or
surface, directly with bolts or through the dedicated fixing
plate (to be ordered separately). Outdoor use requires
suitable flexible cables.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
.12 Forest Green