188
ELSTEADLIGHTING.COM
LANDSCAPE LIGHTING
WITH THE
PROFESSIONAL COLLECTION
The Landscape Professional Collection of ers a versatile selection of high quality, easy
to install and energy ef cient products for all parts of the garden landscape, designed
for use by professional gardeners, landscapers and architects.
Using our excellent low voltage plug & go system allows a large number of fi ttings from
these ranges to be connected together over a distance of up to 80 metres. Furthermore,
all the fi ttings within the plug & go series use LED light sources, which have very good
light output properties alongside exceptionally low energy consumption. Added to this
we of er a complementary range of 220-240V energy ef cient models in matching
designs as well as range accessories to ensure the widest possible choice.
PLUG & GO: HOW IT WORKS
Step 1: Choose the areas you want to have lit, then we suggest that you sketch a rough plan view of each
area involved.
Step 2: Choose the fi ttings which will suit the requirements and list them out with the quantity of each
where relevant. Be careful to bear in mind the voltage of the fi ttings chosen. All 220-240V fi ttings will need
mains supply to wherever they are to be installed whereas all plug & go models just need to be connected
into the low voltage cable (as shown below).
Step 3: Measure the distance involved for the plug & go models chosen and determine, from the cable set
options available which cable set or sets will be needed. Remember, up to 80 metres of cable can be used
from 1 LED driver but the wattage loading must not exceed the recommended minimum, maximum (see
accessories page 209).
Step 4: Plan where the mains supply will originate from.
With the plug & go system you have a choice of placing the
LED driver/drivers in an IP rated wall box on an exterior
wall. However, depending on how large an area is involved,
sometimes more than one mains feed may be needed in
diff erent locations. Consultation with an electrician is
advisable on this matter.
Important
Plug & go fi ttings use a unique single pin, 2 pole plug and
as such are not compatible with any other product or
system. Currently they are not dimmable but they will
work when wired via a timer.
Connecting fitting
Cable set
Minimum of 1.5 m of cable supplied
with each fitting.
