Line / area coupler
SYSTEM DEVICES
Description
The Ekinex® line / area coupler EK-BA1-TP can be used as a line coupler to connect a
secondary line to a main line, as an area coupler to connect a main line to a backbone
line or as a repeater. The device assures galvanic insulation between the two
connected lines and filters the traffic based on installation position or on filter tables
in case of group-oriented communications. The frontal LEDs indicate the status of
each bus line and facilitate the tracing of communication problems due to bus load
or to re-transmission on both lines. The device integrates a KNX bus communication
module and is realized for mounting on a standard 35 mm DIN-rail.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• LEDs indicators for status of KNX bus lines
• Pushbutton for activating special functions
• Connection to bus lines with KNX terminal blocks
• Installation on 35 mm rail (according to EN 60715)
• 2 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 100 g
Technical data
• 30 Vdc power supply by KNX bus
• Current consumption (from main bus line) ca.10 mA
Functions
• Suppress device configuration on the sub line
• Enable or disable filtering of group messages
• Suppress device oriented messages
• Trace the traffic on the sub line
• Reduced number of retransmissions
Delivery
Delivery includes two terminal blocks for connection to the bus lines.
Order information
Code
Package
EK-BA1-TP
1 pcs.
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKBA1TP##.vd4 (download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
90
36
5
45
20
70
bus
status
traffic
GA
function
PA
R EK-BA1-TP
MAIN
SUB
Line/area coupler
IP secure interface
SYSTEM DEVICES
Description
The Ekinex® EK-IE1-SEC-TP IP interface realises a bidirectional data connection
between a PC or laptop and a KNX bus system via a LAN network. The IP interface
supports the tunnelling protocol and allows addressing, parameter setting,
visualisation, protocolling and diagnosis of KNX bus devices via ETS. The device has
an integrated KNX bus communication module and is designed for mounting on a 35
mm profile rail. The power supply is supplied via the KNX bus. As a secure interface,
the device prevents unauthorised access to the system.
Main features
• Plastic housing
• Programming button and LED on the front panel
• LEDs for status and data traffic indication on bus line and Ethernet network
• Buttons for activating special functions
• Connection to bus line via KNX terminal
• Connection to Ethernet network via RJ45 connector
• Mounting on 35 mm profile rail (in accordance with EN 60715)
• Device from 1 modular unit (1 UM = 18 mm)
• IP20 degree of protection (device installed)
• Support of KNX secure technology, can be activated via ETS®.
Technical data
• Power supplied via KNX bus (21-30 Vdc)
• Current consumption 20 mA from KNX bus
• Up to 8 KNXnet/IP connections simultaneously
• Operating temperature: - 5 ... + 45°C
• Relative humidity: 5-93% non-condensing
Delivery
Delivery includes a terminal block for connection to the bus.
Order information
Code
Package
EK-IE1-SEC-TP
1 pcs.
Configuration and commissioning
By means of ETS5 software or later versions
Application programs APEKIE1SECTP##.knxprod (download from www.ekinex.com)
Dimensions [mm]
Documentation
For more information see the technical documentation,
download from www.ekinex.com
TECHNICAL024EN
256
257
03
Introduction
17
Wall-mount devices
247
DIN-Rail mount modules
315
Visualisation
331
Audio Multiroom
379
IP Door Phone
397
Lift TV
409
Tools
413
Sales kit
419
Technical section
429
General terms of sale
433
General index
