Ekinex Италия Срок поставки 60 дней

Каталог Ekinex: Technical Catalogue 2022, стр 136 с 171

Скачать
Запросить цену
Description
The Ekinex® EK-HC1-TP fancoil actuator / controller allows to control a fan coil unit
for the air conditioning of a room. The device can perform the function of simple
actuator in combination with a KNX room thermostat or that of actuator / controller
with acquisition of the temperature value by a KNX room sensor or a probe connected
to an analog input. The device is suitable for 2 or 4-pipe hydraulic distribution
systems with ON / OFF control of one or two electrothermal shut-off valve actuators
and a 3-speed fan or a brushless motor driven fan. The outputs not used to control the
fan coil unit can be configured as binary output channels for different functions. The
device is equipped with 3 inputs freely configurable as analog or digital. The device
is fitted with membrane pushbuttons for manual command and LED’s for status
indication; a pushbutton allows to switch between automatic and manual operation
modes. The device integrates a KNX bus communication module and is realized for
mounting on a standard 35 mm DIN-rail. The device is supplied by the KNX bus and
requires an additional 230 Vac power supply to operate.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LED’s for status indication
• Pushbutton for switching operating mode (normal / programming)
• Connection to bus line with KNX terminal block
• Connection of inputs, outputs and 230 Vac power supply with screw terminals
• Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
• Overvoltage class III (according to EN 60664-1)
• Pollution degree 2 (according to IEC 60664-1)
• 35 mm rail mounting (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 205 g
Technical data
Power supply
• Voltage (loads) 230 Vac 50/60 Hz
• Voltage (electronics) 30 Vdc by KNX bus
Inputs
• 3 freely configurable for passive temperature sensors (10 k NTC at 25°C)
or as potential-free binary inputs
Outputs
• 1 to control a brushless motor driven fan with 0-10 V signal
• 3 interlocked relay outputs to control a 3-speed fan (or configurable as binary
outputs for different applications)
• 2 relay SPST (single pole, single throw) to control two ON / OFF valves (in
2 or 4-pipe hydraulic distribution systems)
Delivery
Delivery includes a terminal block for connection to the bus.
Fancoil actuator / controller
full version
THERMOREGULATION
Order information
Code
Package
EK-HC1-TP
1 pcs.
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKHC1TP##.knxprod
(download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
5
25
20
20
70
45
72
90
IN1
4
3
C
12
11
V1
V2
14
13
V3
16
15
DO1
18
17
DO2
IN2
6
5
IN3
8
7
0-10V 10
9
1
2
L
N
Dev.
Line
Area
bus KNX
-
+
230Vac-50/60Hz
3
1
R
DO1
2
DO2
EK-HC1-TP
Fan-coil actuator/controller
Description
The Ekinex® EK-HB1-TP fancoil actuator / controller allows to control a fan coil unit
for the air conditioning of a room. The device can perform the function of simple
actuator in combination with a KNX room thermostat or that of actuator / controller
with acquisition of the temperature value by a KNX room sensor or a probe connected
to an analog input. The device is suitable for 2-pipe hydraulic distribution systems
with ON / OFF control of one electrothermal shut-off valve actuator and a fan with
brushless motor. The outputs not used to control the fan coil unit can be configured
as binary output channels for different functions. The device is equipped with 2
inputs freely configurable as analog or digital. The device integrates a KNX bus
communication module and is realized for mounting on a standard 35 mm DIN-rail.
The device is supplied by the KNX bus and requires an additional 230 Vac power
supply to operate.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Connection to bus line with KNX terminal block
• Connection of inputs, outputs and 230 Vac power supply with screw terminals
• Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
• Overvoltage class III (according to EN 60664-1)
• Pollution degree 2 (according to IEC 60664-1)
• 35 mm rail mounting (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 175 g
Technical data
Power supply
• Voltage (loads) 230 Vac 50/60 Hz
• Voltage (electronics) 30 Vdc by KNX bus
Inputs
• 2 freely configurable for passive temperature sensors (10 k NTC at 25°C)
or as potential-free binary inputs
Outputs
• 1 to control a brushless motor driven fan with 0-10 V signal
• 1 relay SPST (single pole, single throw) to control an ON / OFF valve (in 2-pipe
hydraulic distribution systems)
Delivery
Delivery includes a terminal block for connection to the bus.
Fancoil actuator / controller
0-10 V fan control
THERMOREGULATION
Order information
Code
Package
EK-HB1-TP
1 pcs.
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKHB1TP##.knxprod
(download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
5
25
20
20
70
45
72
90
IN1
4
3
12
11
14
13
16
15
DO1
18
17
IN2
6
5
8
7
0-10V 10
9
1
2
L
N
Dev.
Line
Area
bus KNX
-
+
230Vac-50/60Hz
R
EK-HB1-TP
Fan-coil actuator/controller
TECHNICAL022EN
270
271
03
Introduction
18
Wall-mount devices
229
DIN-Rail mount modules
297
Supervision
311
Tools
315
Sales kit
321
Technical section
331
General terms of sale
335
General index