Ekinex Италия Срок поставки 60 дней

Каталог Ekinex: Technical Catalogue 2022, стр 119 с 171

Скачать
Запросить цену
Line / area coupler
SYSTEM MODULES
Description
The Ekinex® line / area coupler EK-BA1-TP can be used as a line coupler to connect a
secondary line to a main line, as an area coupler to connect a main line to a backbone
line or as a repeater. The device assures galvanic insulation between the two
connected lines and filters the traffic based on installation position or on filter tables
in case of group-oriented communications. The frontal LEDs indicate the status of
each bus line and facilitate the tracing of communication problems due to bus load
or to re-transmission on both lines. The device integrates a KNX bus communication
module and is realized for mounting on a standard 35 mm DIN-rail.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• LEDs indicators for status of KNX bus lines
• Pushbutton for activating special functions
• Connection to bus lines with KNX terminal blocks
• Installation on 35 mm rail (according to EN 60715)
• 2 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 100 g
Technical data
• 30 Vdc power supply by KNX bus
• Current consumption (from main bus line) ca.10 mA
Functions
• Suppress device configuration on the sub line
• Enable or disable filtering of group messages
• Suppress device oriented messages
• Trace the traffic on the sub line
• Reduced number of retransmissions
Delivery
Delivery includes two terminal blocks for connection to the bus lines.
Order information
Code
Package
EK-BA1-TP
1 pcs.
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKBA1TP##.vd4 (download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
90
36
5
45
20
70
bus
status
traffic
GA
function
PA
R EK-BA1-TP
MAIN
SUB
Line/area coupler
USB interface
SYSTEM MODULES
Description
The Ekinex® USB interface EK-BD1-TP allows a bidirectional data connection
between a PC and a KNX bus system. The device handles the addressing, parameter
setting, display, protocol management and diagnosis of KNX bus devices. The device
integrates a KNX bus communication module and is realized for mounting on a
standard 35 mm DIN-rail.
Main features
• Plastic casing
• LEDs indicators for data transmission on USB and KNX bus status
• Connection to bus line with KNX terminal block
• Connection to PC with USB type B connector
• Installation on 35 mm rail (according to EN 60715)
• 2 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 100 g
Technical data
• Power supply (bus side): 30 Vdc SELV, current consumption: max. 10 mA
• Power supply (PC side): from USB, current consumption: max. 20 mA
Delivery
Delivery includes a terminal block for connection to the bus.
Order information
Code
Package
EK-BD1-TP
1 pcs.
Configuration and commissioning
Not necessary; the application program APEKBD1TP##.vd4 (download from
www.ekinex.com) is available for an ETS project.
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
36
6
24
20
20
71
45
90
USB
KNX
EK-BD1-TP
USB/KNX interface
TECHNICAL022EN
236
237
03
Introduction
18
Wall-mount devices
229
DIN-Rail mount modules
297
Supervision
311
Tools
315
Sales kit
321
Technical section
331
General terms of sale
335
General index