4-channel DALI dimmer 230 Vac
DALI DIMMER
Description
The 4-channel DALI dimmer EK-GO1-DL allows lighting control of dimmable LED
and halogen light sources thanks to a KNX (TP) button connected via DALI/KNX
Gateway or by another device, directly connected to the dedicated input selectable
among normally open button, 0 to 10V analog input, 1 to 10V analog input or 10 k
potentiometer. The 4 phase-cut outputs (trailing edge) at 230 V are suitable for R-C
loads. The device has a built-in DALI communication bus, it is powered by 230 Vac
mains voltage and it does not require an auxiliary power supply.
Main features
• Plastic case
• Device for eight modular units (1 MU = 18 mm)
• Mounting on DIN 35 mm profile rail (EN 60715)
• Degree of protection IP10 (once the device has been installed)
Functions
• Memory function
• Brightness control
• Adjustable minimum brightness
• Soft switching
• Optimized dimming curve
Configuration
• 6 pins dip switch to set the input source (local controls)
• 8 pins dip switch to set the minimum dimming (range:0-20%), independently for
the 4 output channels
Connections
• Screw terminals for DALI bus, command, power supply and LED source
• Maximum length of the connection between dimmer-driver and command < 10 m
Technical details
• Device power supply: 230Vac 50 Hz
• Max power 4 x 200W
• Dimming range 0-100% (depending on the type of source)
230 Vac
50-60 Hz
+
DALI
FUSE
AC Dimmer
EK-GO1-DL
Input: 230V ~ 50Hz
Output: 230V ~
Load: 4x 200W max
DALI IN
DA DA
DA DA
DALI OUT
OUTPUT
1
2
3
4
BUS PWR
1-channel DALI dimmer
DALI DIMMER
Documentation
For further details, consult the technical sheet
STEKGM2DL_EN.pdf, available for download at www.ekinex.com
Documentation
For further details, consult the technical sheet
STEKGO1DL_EN.pdf, available for download at www.ekinex.com
Versions
Code
EK-GM2-DL
Versions
Code
EK-GO1-DL
Description
The 1-channel DALI dimmer EK-GM2-DL allows lighting control of dimmable LED
light sources thanks to a KNX (TP) button connected via DALI/KNX Gateway or
by another device, directly connected to the dedicated input selectable among
normally open button, 0 to 10V analog input, 1 to 10V analog input or 10 k
potentiometer. The device has a built-in DALI communication bus and it requires a
12, 24 or 48 Vdc auxiliary power supply.
Main features
• Plastic case
• Mounting with in-wall box
• Degree of protection IP20 (once the device has been installed)
Functions
• Memory function
• White light/monochromatic light brightness control
• Brightness control dim-to-dark
• Soft switching
• Optimized dimming curve
Configuration
• Using a menu with the possibility of setting minimum dimming, fade-in and
fade-out
Connections
• Screw terminals for DALI bus, command, power supply and LED source
• Maximum length of the connection between dimmer-driver and command < 10 m
Technical details
• Device power supply: 10,8 Vdc (min) … 52,8 Vdc (max)
• Command output: 1 x 6,5 A
• Power absorption (at 40° C): 78 W (12 V), 156 W (24 V), 312 W (48 V)
SUPPLY
+
L
N
230 Vac
12-48 Vdc
DALI
50-60 Hz
+
EK-GM2-DL
Dimmer LED
In: 12-48V - Out: 8A
ETIPEKGM2TPXX00
SMART LIGHTING
SMART LIGHTING
72
73
