Only to be installed by a qualified electrician.
Doxis cannot be held responsible for damage caused by incorrect settings or incorrect installation.
A15
Fortimo SLM: Wiring Touch dim. & DALI dimm.
Independant LED driver
L N
DA DA
TD/DALI driver used as fxed output driver
DALI drivers can be used as fixed output drivers.
When doing this, the DA inputs on the driver need to be short-circuited
This is needed to prevent unwanted behaviour caused by fluctuations
on the main powerline which can trigger the push OFF function.
0-40ms
40-400ms
400-10.000ms
>10.000ms
Operation:
No limit on cable lengths
No limit on number of switches
Maximum 30 drivers can be connected
Possibility to synchronise drivers (when
connecting a new driver for example)
When switching off and back on,
the driver returns to the last dimming level
Push Duration:
Ignore:
Short push:
Long push:
Reset Push:
Dimming with DALI
Dimming with Touch
Setting the correct driver output current
Driver output current is set using a resistor. 3 Types of resistors or possible (depending on the configuration).
Always make sure the correct Rset plug or resistor is inserted BEFORE switching on the luminaire!!!
LEDset
Rset
LED Module
7. . . . .1
GNDset
OR
LED Module
SLM 1100lm:
SLM 2000lm:
SLM 3000lm:
SLM 4500lm:
SLM Crisp White Passive:
SLM Crisp White Active:
SLM Food/Meat Passive:
SLM Food/Meat Active:
LEDset
16900Ω
9760Ω
6650Ω
4120Ω
6650Ω
4120Ω
9760Ω
4120Ω
Rset
560Ω
1200Ω
2050Ω
4870Ω
2050Ω
4870Ω
1200Ω
4870Ω
Driver
PHILIPS
L N
DA
FAN
LED Module
DA
7. . . . .1
L
N
Driver
PHILIPS
L N
DA
FAN
LED Module
DA
7. . . . .1
Fortimo SLM Module
Active cooling (With Fan)
Fortimo SLM Module
Passive cooling (No Fan)
Normally open
push button(NO)
To next driver
Black wire FAN: -
Red wire FAN: +
Black wire LED: -
Red/Pink wire LED: +
Black wire LED: -
Red/Pink wire LED: +
PASSIVE
COOLING
ACTIVE
COOLING
Rset or LEDset
must be inserted
Rset or LEDset
must be inserted
Driver
PHILIPS
L N
DA
FAN
LED Module
DA
7. . . . .1
L
N
DALI +
DALI -
Driver
PHILIPS
L N
DA
FAN
LED Module
DA
7. . . . .1
Fortimo SLM Module
Active cooling (With Fan)
Fortimo SLM Module
Passive cooling (No Fan)
Black wire FAN: -
Red wire FAN: +
PASSIVE
COOLING
ACTIVE
COOLING
Black wire LED: -
Red/Pink wire LED: +
Black wire LED: -
Red/Pink wire LED: +
Rset or LEDset
must be inserted
Rset or LEDset
must be inserted
