SPECIFICATIONS
STANDARD COLOURS
00
PURE WHITE
RAL 9016
01
BLACK
RAL 9005
10
WHITE
RAL 9010
24
BRONZE
25
RUST
30
ANTHRACITE
35
SLATE
GREY
40
GREY
RAL 9006
LED DIRECT AC SYSTEM - Single Emission
COD.
Source
Flux
Fixture
Flux
CCT
CRI
POWER
CL
309-…LD3
1200 lm
270 lm
3000 K
80
12W - 220-240Vac 50/60Hz
I
309-…LD4
1250 lm
285 lm
4000 K
80
12W - 220-240Vac 50/60Hz
I
LED DIRECT AC SYSTEM - Double Emission
COD.
Source
Flux
Fixture
Flux
CCT
CRI
POWER
CL
209-…LD3
1200 lm
540 lm
3000 K
80
12W - 220-240Vac 50/60Hz
I
209-…LD4
1250 lm
570 lm
4000 K
80
12W - 220-240Vac 50/60Hz
I
180
70
110
15
69
DIMENSIONS
ASSEMBLY
CHARACTERISTICS
• Optical system housing accessible during installation, with LED on wall-mounted anchor plate.
• Mounting system body/plate obtained through integrated hinge and locking screw.
• Lateral power cable entry with internal 3-way terminal block for non feed-through wiring.
• Power cable allowed up to 1.5mmq tripolar with external sheath max 10mm.
• LED maintenance by opening the optical compartment.
• Luminaire Conforms to EN60598-1 Standard and special requirements
MATERIALS
• Body: Die-Cast Aluminium Alloy
• Base: Polyamide (PA6) reinforced with Fiber 30% UV resistant GW960° C
• Borosilicate glass with internal acid-etched finish with transmission LT>60%.
• Glass gasket in neutral cross-linking silicone glue - Tx-50/+250°C UV resist.
• Integrated passive heat sink made of aluminium alloy
• Internal and external screws in A2 Stainless Steel
• IP65 Megol resin cable gland UV-Resist. GWT850°C
• Polyester powder coating, UV-stabilised with anti-corrosion treatment.
CL I
• The rated flux values refer to source LED at
Ts85°C / ta25°C
• The Power/Flux in the table refer to maximum
installable value
Installation:
Wall
Beam
>100°
Single Diffuse Emission
Frosted Glass
Not dimmable
Beam
>100°
Double Diffuse Emission
Frosted Glass
Not dimmable
45
WALL
TECNO
