LED SYSTEM WITH BUILT-IN DRIVER - 2 Lights / Underground installation
Beam
XX = ST Road
XX = PP Cycle-Pedestrian
XX = CP Parking / Large Areas
Asymmetric Emission
Silk-Screen Clear Glass
Dali dimmable on request
with extra charge
COD.
Source
Flux
Fixture
Flux
CCT
CRI
Power
CL
LED
772F5/WP70.XX 14000 lm
10719 lm
3000K
>80
70W+35W - 220-240Vac 50/60Hz
I
32+16
772F5/NP70.XX
15000 lm
11473 lm
4000K
>80
70W+35W - 220-240Vac 50/60Hz
I
32+16
772F5 - H.5000
MATERIALS
• Pole / Body supporting structure in extrusion
aluminum alloy.
• Optical compartment in aluminum alloy for
extrusion.
• Ground fixing bracket in AISI 430F steel with
anchoring brackets
• Diffuser in extra-clear transparent Float Glass
Thickness 4mm silk-screened - LTF> 90%
• Seals in EDPM closed cell rubber, UV-resist. Tx
-40 / + 150 ° C.
• Glass gasket in neutral cross-linking silicone
glue - Tx-50 / + 250 ° C UV resist.
• Passive heat sink in extrusion aluminum alloy.
• Internal and external screws in A2 Stainless
Steel
• M16 IP68 brass cable gland
• Polyester powder coating, UV-stabilized with
anti-corrosion treatment.
CHARACTERISTICS
• System with rectangular pole 100x160mm
or cylindrical pole Ø110mm with inspection
compartment and removable door.
• Optical compartment / independent driver not
accessible and connectable via pre-installed
cable type H07RN-F 3x1, removable by screws
and sliding movement from the supporting
structure.
• Driver and LED maintenance only by removing the
optical compartment (at the manufacturer).
• Ground installation by burying the pole with a
compartment for underground cables (H> 4m).
• Ground connection system (alternative) with
anchoring brackets and pre-welded centering
plate.
• Connection to the power supply network through
IP68 protected terminal block for cables with max
diameter 11mm type H07RN-F 3x1.5 or similar.
• Fixed or dimmable output system via built-in
driver. Integrated 10kV SPD protection. Luminaire
Conforms to EN60598-1 Standard and special
requirements
800
1000
H
Buried installation - anchor frame + brackets
TRIM
ASSEMBLY
CL I
Installation:
Ground
• The rated flux values refer to source LED at
Ts85°C / ta25°C
• The Power/Flux in the table refer to maximum
installable value
• Lower powers are available on request, only
for version with built-in driver
• Dimmable system available on request only
with built-in driver
• Pole equipped with inspection door for
connection components
DIMENSIONS
SPECIFICATIONS
ACCESSORIES
MOR683P/2V
IP68 2ways/3poles connector.
Maximum section 3x2.5mm
MOR68Y3P/3V
IP68 3ways/3poles connector Y.
Maximum section 3x2.5mm
381
URBAN LIGHTINGS
