ORION ONE
CHARACTERISTICS
• Optical / Driver section not accessible during
installation.
• Driver compartment separate and accessible
through door with IP68 cable gland.
• Ground connection system with base and
anchoring brackets
• Connection to the power supply network
through M16 IP68 cable gland for cables
max diameter 11mm type H07RN-F 3x1.5 or
similar. Connection terminal block inside the
driver compartment.
• LED maintenance can be carried out by
removing the optical compartment (4 screws).
• Driver
maintenance
in
direct
access
independent from the optical compartment.
• Fixed or Dali dimmable output system via built-
in driver.
• Luminaire Conforms to EN60598-1 Standard
and special requirements
MATERIALS
• Body in die casting aluminum alloy.
• Aluminum alloy rods for extrusion.
• Aluminum alloy pole for extrusion.
• Base in galvanized / painted iron with
anchoring brackets
• Opal diffuser in extruded Polycarbonate (PC)
GWT960 ° C - transmission LT> 45%.
• Seals in EDPM closed cell rubber, UV-resist. Tx
-40 / + 150 ° C.
• Passive heat sink in extrusion aluminum alloy.
• Internal and external screws in A2 Stainless
Steel
• M16 IP68 brass cable gland
• Polyester powder coating, UV-stabilized with
anti-corrosion treatment.
400 / 600*
300 / 500
800
350
250
200
250
200
ASSEMBLY
Recommended minimum
anchor support measures
KIT.002 Ground connection system to be ordered separately
Anchoring system with anchor
frame / brackets available on
request
373
URBAN LIGHTINGS
