FRAME
99
STAINLESS STEEL AISI316L
CHARACTERISTICS
• Optical system housing accessible during
installation.
• Ground connection system with plastic
anchoring plate
• Connection to the power supply network
through cable gland for cables max diameter
11mm type H07RN-F 3x1.5 or similar.
• LED maintenance by opening the optical
compartment.
• Fixed output system with SMD LEDs with
direct 230Vac power supply.
• Luminaire Conforms to EN60598-1 Standard
and special requirements
MATERIALS
• Ring in AISI316L steel plate
• Ground recessed unit in Polyamide (PA6)
filled with 30% GWT960 UV Resist.
• Diffuser in extra-clear acid-etched glass
internally LTF> 60%.
• Seals in EDPM closed cell rubber, UV- resist.
Tx -40/+150°C.
• Passive heatsink in aluminum alloy for
extrusion.
• Internal and external screws in A2 Stainless
Steel
• Polyester powder coating, UV-stabilised with
anti-corrosion treatment.
DIMENSIONS
ASSEMBLY
90
Ø145
3
□
• The rated flux values refer to source LED at
Ts85°C / ta25°C
• The Power/Flux in the table refer to maximum
installable value
• Supplied with recessed box in Polyamide PA6
GW960
• Walkable for pedestrian paths. Max load
500Kg
Installation:
Ground recessed
55
150
150
55
150
168
90
Ø145
1061R
1063R
LED DIRECT AC SYSTEM
LED DIRECT AC SYSTEM
COD.
Source
Flux
Fixture
Flux
CCT
CRI
Power
CL
1061R/WR1.VS.99
450 lm
260 lm
3000 K
80
5W - 220-240Vac 50/60Hz
II
1061R/NR1.VS.99
475 lm
275 lm
4000 K
80
5W - 220-240Vac 50/60Hz
II
COD.
Source
Flux
Fixture
Flux
CCT
CRI
Power
CL
1063R/WR1.VS.99
450 lm
260 lm
3000 K
80
5W - 220-240Vac 50/60Hz
II
1063R/NR1.VS.99
475 lm
275 lm
4000 K
80
5W - 220-240Vac 50/60Hz
II
Beam>100°
VS=Frosted Glass
Diffuse Emission Uplight
Frosted Glass
Not dimmable
Beam>100°
VS=Frosted Glass
Diffuse Emission Uplight
Frosted Glass
Not dimmable
SALINITY RESISTANT
SALINITY RESISTANT
SALINITY RESISTANT
SALINITY RESISTANT
259
GROUND RECESSED
LUCY
SPECIFICATIONS
SALINITY
RESISTANT
